Your Mold Transparent clear powder lacquer
Code: YM/7110-11-50Product detailed description
Your Mold Transparent is a clear powder lacquer for finishing lead castings. Once properly fused, it allows the underlying surface to remain visible; milky loose powder does not mean an opaque white coating.
Choose 50 g or 500 g. Both sizes contain the same material. You are buying powder; the head and hook are shown only as an application example.
Transparent is not a white primer or a glow-in-the-dark colour. Use it over another coating only after checking compatibility and the complete coating procedure. Do not reheat a finished painted jig head solely to dip it into clear powder.
On clean metal, this lacquer forms a clear film. For layered coatings, test adhesion and appearance first. To protect an already finished colour, a compatible clear epoxy coating intended for coating applications can be used after the base has fully cooled and cured. Follow its mixing, application and curing instructions.
Application procedure
- Clean, degrease and completely dry the casting. Remove burrs and oxidation.
- Fluff the powder; use gentle airflow in a fluidising cup. Keep different powders in separate containers.
- Heat the lead section evenly in a dedicated electric workshop oven or with a heat gun, following the coating instructions and allowing for casting size.
- Briefly dip the hot clean metal into clear powder. When applying over another coating, follow a verified multilayer process; this is not a universal extra dip for an already finished painted part.
- Keep the film thin and attachment eyes clear. Allow it to flow and complete curing according to the chosen system instructions; actual metal temperature and time matter.
- Allow to cool naturally, then check adhesion, appearance and passages. Test one part before coating a batch.
Safety when coating lead castings
- Use effective ventilation, avoid breathing dust and follow the coating safety sheet. Wear appropriate eye, hand and respiratory protection.
- Handle hot parts with suitable tools over a heat-resistant surface. Keep the workshop oven and equipment separate from food preparation.
- Avoid overheating hooks. Fit plastic inserts and glued eyes after cooling; keep eyes and passages clear.
- Do not eat, drink or smoke when handling lead. Clean up dust and wash your hands afterwards. These instructions concern coating finished castings; pouring molten metal requires separate precautions.
Frequently asked questions (FAQ)
What is included?
One Transparent pack in the selected 50 g or 500 g size. The pictured head, hook and coating equipment are not included.
Does the material change with pack size?
No. Both pack sizes contain the same Transparent material; only the quantity changes.
Is this a white primer?
No. The finished film is transparent and reveals the substrate. White powder primer is a separate colour.
Is this the NEON-UV range?
This product is outside the NEON-UV range and has no declared afterglow.
Can I use the same baking schedule for every powder?
No. Follow the label and technical sheet for the specific coating. Similar colour or identical pack size does not establish the same curing schedule.
Does the photo show the actual pack?
It is a digitally edited illustration of powder and coating on a head. Lighting and screen settings affect the displayed shade; you are buying powder rather than the pictured hook.
→ Compare powder coatings and read our guide to paint and coating types.
Additional parameters
| Category: | Powder coating for lead weights |
|---|---|
| Coating type: | clear powder lacquer |
| Colour / finish: | Transparent – clear |
| Pack size: | 50 g / 500 g |
| Use: | lead jig heads, pilkers and fishing weights |
| Base coat: | clean metal or a compatible coating |
| Light effect: | no declared afterglow, outside NEON-UV range |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!