Your Mold Schwarz powder paint – black
Code: YM/7110-6-80Product detailed description
Your Mold Schwarz powder paint – black is a polyester powder for coating lead jig heads, pilkers and fishing weights. The black shade forms a continuous coloured film after fusion. Matte loose powder and the glossy finished surface have different appearances.
Choose 80 g or 1000 g. Both sizes contain the same material. You are buying powder; the head and hook are shown only as an application example.
This shade belongs to the standard powder range rather than NEON-UV. A bright colour alone does not establish UV response or glow after the lights are switched off.
A tougher standard base than the brittle NEON-UV range. Adhesion and mechanical durability depend on surface preparation, film thickness and curing. For the hardest impacts on large sea-fishing and carp weights, choose a rubber-style shell, which better accommodates deformation of soft lead.
Apply directly to clean, heated metal, or use our recommended thin compatible white base coat as an additional layer. Its cushioning function describes SAF workshop experience, not a measured manufacturer impact rating.
Application procedure
- Clean, degrease and completely dry the casting. Remove burrs and oxidation.
- Fluff the powder; use gentle airflow in a fluidising cup. Keep different powders in separate containers.
- Heat the lead section evenly in a dedicated electric workshop oven or with a heat gun, following the coating instructions and allowing for casting size.
- When using a white base, briefly dip the hot head into white powder and immediately afterwards into the coloured powder. Otherwise dip directly into the colour. Gently tap off excess.
- Keep the film thin and attachment eyes clear. Allow it to flow and complete curing according to the chosen system instructions; actual metal temperature and time matter.
- Allow to cool naturally, then check adhesion, appearance and passages. Test one part before coating a batch.
Follow the 7110 technical sheet for curing. Heating the part through and curing the coating are different stages.
SAF workshop tip: rubber base with coloured speckles
Apply a black rubber-style shell to a large casting. While it is warm and soft, add a light dusting of coloured powder through a sieve or with a dry spatula, then gently fuse it according to coating compatibility. The rubber forms the protective base and the powder creates coloured speckles. Test one piece first.
Safety when coating lead castings
- Use effective ventilation, avoid breathing dust and follow the coating safety sheet. Wear appropriate eye, hand and respiratory protection.
- Handle hot parts with suitable tools over a heat-resistant surface. Keep the workshop oven and equipment separate from food preparation.
- Avoid overheating hooks. Fit plastic inserts and glued eyes after cooling; keep eyes and passages clear.
- Do not eat, drink or smoke when handling lead. Clean up dust and wash your hands afterwards. These instructions concern coating finished castings; pouring molten metal requires separate precautions.
Frequently asked questions (FAQ)
What is included?
One Schwarz pack in the selected 80 g or 1000 g size. The pictured head, hook and coating equipment are not included.
Does the material change with pack size?
No. Both pack sizes contain the same Schwarz material; only the quantity changes.
Is a white base required?
No. Apply directly to prepared heated metal, or use our recommended white base as an additional layer.
Is this the NEON-UV range?
This product is outside the NEON-UV range and has no declared afterglow.
Can I use the same baking schedule for every powder?
No. Follow the label and technical sheet for the specific coating. Similar colour or identical pack size does not establish the same curing schedule.
Does the photo show the actual pack?
It is a digitally edited illustration of powder and coating on a head. Lighting and screen settings affect the displayed shade; you are buying powder rather than the pictured hook.
→ Compare powder coatings and read our guide to paint and coating types.
Additional parameters
| Category: | Powder coating for lead weights |
|---|---|
| Coating type: | polyester powder paint |
| Colour / finish: | Schwarz – black |
| Pack size: | 80 g / 1000 g |
| Use: | lead jig heads, pilkers and fishing weights |
| Base coat: | direct to metal, optional white base |
| Light effect: | no declared afterglow, outside NEON-UV range |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!