BKK Fangs-63 UA Treble Hooks #6 (8pcs)

Product detailed description

BKK Fangs-63 UA #6 is the second-smallest size in the 3X range and forms the working transition between compact #8 and larger #4. Specific reference examples include minnows, stickbaits and swimming poppers measuring approximately 65–125 mm and weighing 15–31 g. This is not a universal recommended range for every hardbait; the examples simply show how strongly lure shape and construction can influence the correct size.

The broad 65–125 mm span is not a contradiction. A shorter but bulkier swimming popper may need similar gape to a longer and slimmer minnow. Body width, number of hook hangers, hook position, original split ring, buoyancy and the weight of the factory rigging all matter. Size #6 is suitable only when all three points remain clear of the body and the hook can rotate freely.

The 3X designation describes the construction and wire class, not a guaranteed load rating or an exact multiple of load capacity. Fangs-63 #6 is a more robust choice than a 2X hook carrying the same size number, but the greater reserve also adds weight and resistance. On a finely balanced minnow or floating popper, you must therefore confirm that the 3X rigging has not altered diving depth, buoyancy or the character of the lure’s action.

The construction uses a forged profile and a bend inspired by O’Shaughnessy geometry. A regular eye is complemented by three needle-sharp points with standard barbs. This geometry gives Fangs-63 a different working logic from ranges with inward-turned points. Nevertheless, the sharpness and condition of all three points must be checked individually, especially after contact with rock, metal or hard bottom.

On a minnow or stickbait, check not only the clearance between the points and the body but also the distance between both treble hooks. They must not lock together or flip over the lure’s side during a sharp twitch. On a swimming popper, check its starting position, surface action and whether the rear 3X treble pulls the lure down more than the original rigging. Reference lengths and weights only become useful after this physical inspection.

Neighbouring #8 is the better choice when you want to limit the profile and weight of the rigging on a compact hardbait. Consider #4 if #6 does not provide enough working gape around a wider body. A longer lure does not automatically require #4: a slim model may work well with #6, while a shorter bulky lure may need a larger hook. The actual shape, original rigging and test in the water are decisive.

Fangs-63 UA #6 adds the strength reserve of a 3X construction over Fangs-62 UA #6. Fangs-62 remains the 2X alternative when lower weight, less resistance and minimal influence on the lure’s action are essential. Fangs-63 makes sense when the same nominal size fits proportionally and the setup needs a more robust hook. Nominal size #6 does not guarantee the same overall height, gape or weight, so a direct comparison of both ranges cannot be omitted.

Sting-32 MT #6 is another 2X alternative within the overlapping size range. It is intended for freshwater and light inshore use, with an inward-turned Combat Point and a matt finish. Fangs-63 UA #6 combines 3X construction, needle points in the Fangs family and an Ultra-Antirust coating. The choice therefore depends on the required geometry, fishing environment and the influence of hook weight on the lure.

The Ultra-Antirust coating supports use in saltwater, although #6 can also be used in freshwater. After changing the hook, check the lure’s action in the conditions in which you will actually fish. The difference between fresh and salt water is not only about corrosion: water density, retrieve style and the lure’s specific buoyancy can accentuate the change caused by more robust rigging.

A suitable split ring is also part of correct rigging. A ring that is too small can restrict movement, while one that is too large can change the hook’s spacing and position relative to the body. On a lure fitted with two trebles, check their clearance in every direction and at maximum deflection. Fangs-63 #6 must move freely rather than resting its points against the lure or the other hook.

After saltwater use, rinse #6 with fresh water, allow it to dry completely and inspect the points, barbs, eye, coating and split ring. Ultra-Antirust increases corrosion resistance but does not protect the hook against mechanical blunting. Store hooks with this coating separately from lead items and do not place them wet among other metal tackle.

This version contains 8 treble hooks in size #6. SAF does not include the exact weight of one hook in the product parameters without carrying out its own physical weighing. Check all three points before first use and repeat the inspection after contact with rock, metal or another hard obstruction.

For more detailed guidance on size, working gape and the effect of hook weight on the lure, see our BKK Fangs-62 UA treble hook size guide. The article provides a lighter 2X reference map; when moving to Fangs-63, physically compare the dimensions again and test the heavier 3X rigging.

Fangs-63 UA #6 is suitable when the proportions of a hardbait require more gape than #8, while there is still no reason to move to the larger #4. Reference examples of 65–125 mm and 15–31 g confirm that length or weight alone is not enough. The final choice is determined by body width, original hook, hook-hanger spacing, point clearance and preserved lure action. Fangs-62 and Sting-32 MT remain the direct comparison points for lighter 2X rigging.

Frequently asked questions – BKK Fangs-63 UA #6

Why does size #6 have such a broad 65–125 mm reference range?

Because these are specific reference lures with different body shapes, not a universal table range. A shorter bulky popper may need a hook similar in size to the one used on a longer slim minnow.

Which types of hardbaits suit Fangs-63 UA #6?

It is an approximate starting point for proportionally suitable minnows, stickbaits and swimming poppers. The points must remain exposed, the hook must move freely and the lure must retain its original working character.

How should I choose between Fangs-63 UA #8, #6 and #4?

#8 limits profile and weight on compact lures, #6 forms the middle working step and #4 adds gape around a wider body. Confirm the choice by direct physical comparison and a test in the water.

Is Fangs-63 UA #6 the same as Fangs-62 UA #6, only stronger?

No. Fangs-63 is a 3X construction and Fangs-62 a 2X construction, but the same size number does not guarantee identical dimensions or weight. Fangs-62 usually has less influence on the action; Fangs-63 provides a more robust strength reserve.

When does Sting-32 MT make more sense than Fangs-63 UA #6?

When you need a 2X hook for freshwater or light inshore use and prefer an inward-turned Combat Point with a matt finish. Choose Fangs-63 for its 3X construction and Ultra-Antirust coating.

Does the 3X designation specify the exact load rating of size #6?

No. 3X identifies the construction and wire class, not a value in kilograms or a guaranteed threefold increase in load capacity. The result also depends on the split ring, leader, drag and complete setup.

What should I do with size #6 after saltwater fishing?

Rinse it with fresh water, allow it to dry completely and inspect every point, barb, eye, forged profile and split ring. Store dry hooks with an Ultra-Antirust coating separately from lead items.

→ Full technical details are listed below in the Product Parameters table.

↓ Related and similar products are also shown below the description to help you choose the right components and build a complete setup.