SaBoFlex Snow White – Plastisol Liquid Colour

Product detailed description

SaBoFlex Snow White is a concentrated pigment paste for colouring plastisol when making soft-plastic fishing lures. It belongs to the SaBoFlex metallic colour range. This is a colour concentrate designed to be mixed into plastisol – not ready-to-use plastisol, an airbrush paint or a surface coating.

Snow White is a bright white shade with a metallic character for making soft-plastic lures. Its final appearance depends on the dose, the base plastisol, the thickness of the casting and the lighting, so assess it only on a cooled sample.

Snow White is not the same as the basic Standard White, so do not treat the two as interchangeable because they share the word White. Snow White identifies a separate metallic colour; the name alone does not confirm fluorescence, UV activity or a particular level of opacity.

The correct workshop method for this SaBoFlex colour is to add it in small amounts to plastisol that is already hot and clear. Unheated transparent base plastisol looks milky or cloudy, making the final intensity difficult to judge. Once the plastisol has reached the clear working state specified by its manufacturer, you can see the change after each addition and build the result gradually. Do not overheat the plastisol.

We do not specify a fixed number of drops per 100 g. Drop size varies with the dispensing nozzle, while the finished result also depends on the base plastisol, casting thickness, other additives and lighting. Start with a small amount: a result that is too light can be intensified, but colour already added cannot be removed. For repeatable batches, record the amount of plastisol, the colour dose and all other additives.

Use it for an entire pale lure body, a prominent belly, a lateral stripe or one layer of a multicolour casting. It also works as a bright counterpart to a dark back. Verify every proposed combination and ratio in a small trial batch first.

The 50 g option is practical for trying the shade, making smaller batches or equipping a workshop that uses a wider palette. The 250 g bottle is better suited to regular production or repeated recipes, offers better value per gram and is easier to homogenise by shaking because of the greater mass of its contents. The concentration and method of use are the same for both pack sizes.

Storage and packaging appearance

The pigment paste and base plastisol are different materials and should not be treated identically in storage. In SAF workshop experience, this colour remains easier to work with in cooler conditions than plastisol itself, but the manufacturer does not publish an exact minimum storage temperature. Do not regard it as frost-resistant. Store the bottle upright, tightly closed and dry at a stable room temperature, away from direct sunlight, heat sources and frost. If the sealed bottle has become cold, allow it to return naturally to room temperature before opening, then shake it thoroughly. Do not warm it on a radiator, hot plate or in a microwave oven.

Packaging notice: Especially after transport, a light oily film may appear around the thread or leave a mark on the label, even when the bottle is closed. If there is no visible loss of contents, this surface trace does not affect the use of the colour; we apologise for any marking of the label. After dosing, wipe the bottle neck and thread, retighten the cap firmly and store the bottle upright, ideally in a washable tray or sealed bag.

Frequently asked questions about SaBoFlex Snow White

How does Snow White differ from Standard White?

They are separate shades from different ranges. Snow White belongs to the metallic colours, whereas Standard White is a basic white. Compare equally thick, cooled samples made with the same plastisol.

Can Snow White colour the entire lure body?

Yes. It can be used as the main colour of a complete casting. Begin with a small dose and check the cooled result, because the hot mixture may not look the same as the finished lure.

Which back colours can be paired with Snow White?

For a clear two-colour profile, try a black, blue, green or purple back. Test each combination in a small batch so the layers complement one another as intended.

Is Snow White fluorescent or UV-active?

The Snow White name does not confirm either property. If you require fluorescence or a stated UV effect, choose a product for which that feature is explicitly declared by the manufacturer or in the product parameters.

Why should I inspect Snow White after cooling?

Mixture temperature, casting thickness and incident light change how a pale metallic colour is perceived. A thin cooled drop or test casting provides a more reliable basis for further dosing.

Can glitter be added to Snow White?

Yes, provided it is suitable for the temperatures used when processing plastisol. First set the Snow White base shade, add glitter only at the end and verify the result on a test casting.

→ All detailed technical information can be found below in the Product parameters table.

↓ Below the product description you will also find related and similar products to help you choose and build a complete setup.