BKK Fangs-62 UA Treble Hooks #3 (7pcs)

Product detailed description

BKK Fangs-62 UA #3 is a larger intermediate size for lures where #4 no longer provides sufficient working gape, while #2 would unnecessarily increase the profile and weight of the rigging. Based on SAF’s physical comparison, it is very well suited to compact pilkers and speed jigs measuring approximately 8–9.5 cm / 60–80 g, spoons of a similar length, and freshwater or saltwater streamers up to about 15 cm. It can also be used on hardbaits, jerkbaits, topwater lures, crankbaits, casting jigs and lighter stinger rigs when its proportions match the lure body.

With a metal lure, weight alone does not determine the correct hook. A treble hook needs enough gape for its points to remain exposed beyond the sides of the lure body, but it must not repeatedly catch the lure during the fall or retrieve. A slim 80 g speed jig may work well with a smaller hook than a shorter but wider 60 g pilker. The 8–9.5 cm / 60–80 g range is therefore a practical starting point, not a fixed conversion. Body width and thickness, eye position, split-ring size and retrieve style must also be considered.

The 2X designation describes the wire and strength class, not an exact load rating in kilograms. Fangs-62 is neither a delicate 1X treble nor a heavy-duty hook for extreme fishing. Its advantage lies in the balanced combination of strength, gape and low weight. With size #3, this balance is particularly important on compact metal lures, spoons and hardbaits whose fall, centre of gravity or action may respond sensitively to a change in rigging.

The geometry is based on a traditional O’Shaughnessy bend. BKK combines it with a forged shank, regular eye and three needle-sharp points with standard barbs. According to the manufacturer, forging increases strength by approximately 20% compared with similar non-forged hooks. The reliability of the complete rig also depends on the sharpness of all three points, the condition of the split ring, leader strength, drag setting and the angle at which the fish takes the lure.

The hook is manufactured from BKK-81WV high-carbon steel and finished with an Ultra-Antirust (UA) coating for increased corrosion resistance in saltwater. Size #3 can therefore be used on saltwater pilkers, speed jigs, spoons and streamers, as well as on freshwater lures for pike, zander, asp, perch and other predators. After saltwater use, rinse the hook with fresh water, allow it to dry completely and inspect both the points and the coating for mechanical damage.

On compact pilkers and speed jigs measuring approximately 8–9.5 cm and weighing around 60–80 g, size #3 provides a very good starting balance between gape and weight based on SAF’s physical comparison. On a slim jig, it helps preserve a fast, clean fall and low resistance. On a wider pilker, confirm that the points do not remain hidden behind the sides of the body. After fitting the hook, check that it rotates freely, does not lie flat against the metal with all three points and does not repeatedly catch the lure during use.

On spoons measuring approximately 8–9.5 cm, low hook weight is particularly important. An excessively heavy treble can pull down the rear section, accelerate the fall and restrict the rocking or fluttering action. Size #3 provides more working gape than #4 or #5 while remaining lighter and less prominent than #2. After replacing the original hook, compare not only the dimensions but also the spoon’s behaviour during a slow retrieve, pause and free fall.

On hardbaits, crankbaits, jerkbaits and topwater lures, size #3 is suitable mainly when its overall height, gape and weight match the original rigging. As an approximate guide, this may include hardbaits measuring around 8–11 cm, but length alone is not enough. Lure construction, number of hooks, buoyancy and weight distribution can shift the correct size considerably. On a floating hardbait, monitor buoyancy; on a suspending model, check its neutral position; and on a topwater lure, confirm that it starts correctly and stays near the surface.

For streamers up to about 15 cm, size #3 is a suitable starting point in both freshwater and saltwater, provided that the tying material leaves the points exposed. A slim 15 cm pattern may work with the lighter #4, while #3 adds clearance around a medium-dense or wider profile. A shorter but extremely bulky streamer tied with fur or dense synthetic fibres may require #2. On a stinger rig, also consider the treble’s position within the lure profile, the lure’s buoyancy and whether the material folds over the points during the retrieve.

There is no rigid boundary between neighbouring sizes. #4 is the finer choice for slimmer or sensitively balanced lures where you want to minimise hook weight and profile. Based on SAF’s physical comparison, #3 is well suited to compact pilkers, speed jigs and spoons measuring 8–9.5 cm and weighing approximately 60–80 g, as well as streamers up to about 15 cm. #2 adds more working gape for wider bodies, longer metal lures or more densely tied streamers.

Fangs-62 UA #3 is not automatically a substitute for the more robust Raptor-Z, Raptor-X or Viper-41 ranges. These models make more sense when maximum resistance to straightening matters more than low hook weight and preservation of subtle lure action. Fangs-62 has a different role: it provides a sharp, forged and corrosion-protected 2X treble hook with a favourable strength-to-weight ratio for both freshwater and saltwater.

The BKK Fangs-62 UA size table is an approximate guide to the complete range. It is not a universal conversion between lure length or weight and hook size. Before final rigging, always check the physical proportions of the specific lure, the original hook, split-ring size and freedom of movement.

This version contains 7 treble hooks in size #3. One hook weighs approximately 0.91 g. Before first use, check the sharpness of all three points and repeat the inspection after every contact with rock, a metal boat hull or another hard obstruction. Replace a blunt or mechanically damaged point; an intact-looking coating alone does not prove that the hook remains sharp.

BKK Fangs-62 UA #3 is suitable for anglers seeking a larger intermediate 2X treble hook with corrosion protection. Its main applications include compact pilkers, speed jigs and spoons measuring 8–9.5 cm / approximately 60–80 g, proportionally matched hardbaits and streamers up to about 15 cm where #4 lacks sufficient gape but #2 would already be unnecessarily prominent.

Frequently asked questions – BKK Fangs-62 UA #3

Which lures suit size #3?

Size #3 is a suitable starting point for proportionally matched compact pilkers, speed jigs and spoons measuring 8–9.5 cm / approximately 60–80 g, hardbaits around 8–11 cm, casting jigs and streamers up to about 15 cm. Always confirm that the hook moves freely and that the lure body or tying material does not shield the points.

Is Fangs-62 UA #3 suitable for 60–80 g pilkers and speed jigs?

Yes. Based on SAF’s physical comparison, #3 is a very good starting point for compact metal lures measuring approximately 8–9.5 cm within this weight range. It is not a fixed conversion, however. Body width and thickness, eye position, split-ring size and retrieve style also matter.

Is size #3 suitable for spoons measuring 8–9.5 cm?

Yes, provided that it preserves their rocking and fluttering action. Size #3 offers more working gape than #4 while remaining lighter and less prominent than #2. After replacing the original hook, always check the spoon’s behaviour during both a slow retrieve and the fall.

How should I choose a treble-hook size for a streamer up to 15 cm?

Do not consider length alone. A slim 15 cm streamer may work with #4, while #3 provides more working gape around a wider or medium-dense profile. A very bulky pattern may require #2. Consider the volume of the material, profile width, buoyancy, stinger position and whether the fibres shield the points.

What is the difference between sizes #4, #3 and #2?

#4 is the lighter choice for slimmer or sensitively balanced lures. #3 forms the precise intermediate step and, based on SAF’s physical comparison, is well suited to compact metal lures measuring 8–9.5 cm / approximately 60–80 g and streamers up to 15 cm. #2 adds more gape for wider bodies or situations where #3 does not provide sufficient clearance around the lure.

Can this treble hook be used in saltwater?

Yes. The Ultra-Antirust coating is designed to provide increased corrosion resistance in saltwater. After fishing, rinse the hook with fresh water, allow it to dry completely and inspect both the points and the coating before using it again.

Will size #3 change the action of the lure?

It can. One size #3 hook weighs approximately 0.91 g and may change the centre of gravity, buoyancy, water resistance or character of the fall compared with another hook. Compare the new rigging with the original setup and test the lure during a normal retrieve and free fall.

→ Full technical details are listed below in the Product Parameters table.

↓ Related and similar products are also shown below the description to help you choose the right components and build a complete setup.