Dead On Plastix EMC – Pearl Plastisol Colour

Product detailed description

Dead On Plastix EMC from the Pearl Effects Colorant range is a concentrated liquid plastisol colour for making soft plastic lures. EMC is the Emerald City shade. It creates a green to green-turquoise appearance with a pearl effect for custom natural-colour and contrasting recipes. Add the colour concentrate to your base plastisol; it is neither ready-to-use plastisol nor a surface paint for finished lures.

Its key feature is NO-BLEED, which reduces colour migration. When differently coloured layers are in contact, colour can gradually move between them and alter their shade. EMC is designed to greatly reduce this unwanted transfer. This is useful for laminated, two-colour and multicolour lures, especially when combining a dark back with a light belly and aiming to keep the layers visually separate over time. Always test the complete combination with your chosen plastisol, second colour and additives.

EMC for your own recipes. EMC stands for Emerald City in the Pearl Effects Colorant range. Use the green pearl base on its own or test it as one of the layers. The pearl character is part of the colour itself; additional glitter is optional and changes the appearance rather than creating the basic effect. For additional speckling, choose SaBoFlex Plastisol Glitter – Black or other plastisol glitters. Use additives suitable for plastisol processing temperatures.

The final shade depends on colour dosage, plastisol type, lure thickness, other additives, lighting and the transparency of the layer. The same mix can therefore look different in a thin tail and a thick body. Neither a photograph nor the concentrate in the bottle is an exact colour chart for the finished lure. Judge the result on a cooled test sample of the appropriate thickness. Assess the EMC pearl effect from different viewing angles as well.

Dosage and shaking

The manufacturer shows reference samples made with approximately 25 drops per 1/2 US cup of plastisol. It gives a guide of 40–50 drops per US cup for some shades, but states that primary, secondary and tertiary colours require substantially less. This is therefore not a universal dose for every colour. Start with a small amount and adjust the intensity using a cooled casting.

We therefore do not give a fixed conversion to drops per 100 g of plastisol. Start with a smaller amount, mix thoroughly and increase the intensity gradually. The manufacturer recommends shaking the bottle vigorously for at least about one minute before use. Once you have adjusted the shade on a cooled sample, record the amount of plastisol, the colour dose and any other additives. Use the same dosing method when repeating the recipe.

For smaller batches, use borosilicate glass containers, such as a 250 ml measuring cup or a 500 ml measuring cup. Clean, dry stainless steel mixing balls can help homogenise colours; choose their size and number to suit the bottle.

All three bottle sizes contain the same colour at the same concentration. Choosing a different volume changes the amount available, not the strength of the colourant.

Lamination and twin injection

Use EMC for a green pearl layer or the main body. Melons offers a useful green-shade comparison, while Marsh Grass provides another pearl character. For twin injection, prepare the two coloured mixtures separately. The injector setup can use the Twin Adapter / T-ADAPTER and Double Clamp / T-KLAMMER; check compatibility with your particular injectors and mould. NO-BLEED helps reduce subsequent colour migration, while forming a sharp boundary also depends on the mould, temperatures and injection technique. Check a new colour pairing both after cooling and after storing the sample.

Storage and safe handling

Store the colour upright, tightly closed and at a stable room temperature, away from direct sunlight and temperature extremes. Shake thoroughly before every use. Follow the current product label and safety instructions for precise storage conditions.

When working with hot plastisol, wear safety glasses and heat-resistant gloves. Provide effective ventilation, ideally extraction at the source, and do not overheat the plastisol. Containers and tools must be clean and completely dry; keep water away from the hot mixture. Keep colourants and other workshop materials out of the reach of children and follow the instructions supplied by the manufacturers of your plastisol and additives.

Dead On Plastix EMC: frequently asked questions

What does NO-BLEED mean for Dead On Plastix EMC?

The colour is designed to greatly reduce unwanted colour migration between adjacent plastisol layers. It helps keep colours separate in laminates; it is not an absolute guarantee for every mixture and every condition.

What shade does EMC produce?

A green to green-turquoise appearance with a pearl effect. EMC is short for Emerald City, not a separate additional shade. The exact appearance depends on the recipe and lighting.

Do I need glitter to obtain the pearl effect?

No. The pearl character is part of EMC itself. Additional glitter is optional, for a different appearance or more distinct individual particles.

How much colour should I use?

Start with a small dose and increase it gradually. The manufacturer uses roughly 25 drops per 1/2 US cup for reference samples, but colour strength varies. Drop size also depends on the bottle tip. We do not give a fixed conversion per 100 g.

How long should I shake the colour before use?

The manufacturer recommends shaking vigorously for at least about one minute. The contents of the bottle must be evenly mixed before dosing.

Is EMC suitable for laminated lures?

Yes. Reduced migration is particularly useful with a dark back and light belly or other contrasting layers. Always test the full combination of colours, plastisol and additives.

Is EMC a UV, fluorescent or metallic colour?

EMC belongs to Pearl Effects Colorant and has a pearlescent character. Being in this range does not imply a UV effect or glow in the dark.

Can I combine EMC with other colours and glitter?

Yes. Use additives suitable for plastisol and start with a small trial batch when developing your own recipes. Adding another colour can change both the shade and the mixture’s migration behaviour. The NO-BLEED property cannot automatically be assumed for every combination.

→ You will find detailed technical information below in the product parameters table.

↓ Related equipment for making your own soft plastic lures is listed below the product description.