Dead On Plastix Heisenberg – Pearl Plastisol Colour

Product detailed description

Dead On Plastix Heisenberg from the Pearl Effects Colorant range is a concentrated liquid plastisol colour for making soft plastic lures. It creates a vivid blue to turquoise-blue appearance with a pearl effect. Use it for blue bodies, bright sheen and contrasting layers in soft plastic lures. Add the colour concentrate to your base plastisol; it is neither ready-to-use plastisol nor a surface paint for finished lures.

Its key feature is NO-BLEED, which reduces colour migration. When differently coloured layers are in contact, colour can gradually move between them and alter their shade. Heisenberg is designed to greatly reduce this unwanted transfer. This is useful for laminated, two-colour and multicolour lures, especially when combining a dark back with a light belly and aiming to keep the layers visually separate over time. Always test the complete combination with your chosen plastisol, second colour and additives.

Heisenberg for your own recipes. Heisenberg provides a blue pearl character for a full body or individual sections. Its pearl effect is part of the colour and does not require a separate dose of glitter. Add any larger particles or speckling only after assessing the base sample. For additional speckling, choose SaBoFlex Plastisol Glitter – Black or other plastisol glitters. Use additives suitable for plastisol processing temperatures.

The final shade depends on colour dosage, plastisol type, lure thickness, other additives, lighting and the transparency of the layer. The same mix can therefore look different in a thin tail and a thick body. Neither a photograph nor the concentrate in the bottle is an exact colour chart for the finished lure. Judge the result on a cooled test sample of the appropriate thickness. Assess the Heisenberg pearl effect from different viewing angles as well.

Dosage and shaking

The manufacturer shows reference samples made with approximately 25 drops per 1/2 US cup of plastisol. It gives a guide of 40–50 drops per US cup for some shades, but states that primary, secondary and tertiary colours require substantially less. This is therefore not a universal dose for every colour. Start with a small amount and adjust the intensity using a cooled casting.

We therefore do not give a fixed conversion to drops per 100 g of plastisol. Start with a smaller amount, mix thoroughly and increase the intensity gradually. The manufacturer recommends shaking the bottle vigorously for at least about one minute before use. Once you have adjusted the shade on a cooled sample, record the amount of plastisol, the colour dose and any other additives. Use the same dosing method when repeating the recipe.

For smaller batches, use borosilicate glass containers, such as a 250 ml measuring cup or a 500 ml measuring cup. Clean, dry stainless steel mixing balls can help homogenise colours; choose their size and number to suit the bottle.

All three bottle sizes contain the same colour at the same concentration. Choosing a different volume changes the amount available, not the strength of the colourant.

Lamination and twin injection

Use Heisenberg for a blue body, back or separate layer. Start by testing the contrast with White or Black, and compare its pearl character with Marsh Grass. For twin injection, prepare the two coloured mixtures separately. The injector setup can use the Twin Adapter / T-ADAPTER and Double Clamp / T-KLAMMER; check compatibility with your particular injectors and mould. NO-BLEED helps reduce subsequent colour migration, while forming a sharp boundary also depends on the mould, temperatures and injection technique. Check a new colour pairing both after cooling and after storing the sample.

Storage and safe handling

Store the colour upright, tightly closed and at a stable room temperature, away from direct sunlight and temperature extremes. Shake thoroughly before every use. Follow the current product label and safety instructions for precise storage conditions.

When working with hot plastisol, wear safety glasses and heat-resistant gloves. Provide effective ventilation, ideally extraction at the source, and do not overheat the plastisol. Containers and tools must be clean and completely dry; keep water away from the hot mixture. Keep colourants and other workshop materials out of the reach of children and follow the instructions supplied by the manufacturers of your plastisol and additives.

Dead On Plastix Heisenberg: frequently asked questions

What does NO-BLEED mean for Dead On Plastix Heisenberg?

The colour is designed to greatly reduce unwanted colour migration between adjacent plastisol layers. It helps keep colours separate in laminates; it is not an absolute guarantee for every mixture and every condition.

What shade does Heisenberg produce?

A vivid blue to turquoise-blue appearance with a pearl effect. The colour shown on a screen is not an exact shade guarantee; judge a cooled sample made with your own plastisol.

Do I need glitter to obtain the pearl effect?

No. The pearl character is part of Heisenberg itself. Additional glitter is optional, for a different appearance or more distinct individual particles.

How much colour should I use?

Start with a small dose and increase it gradually. The manufacturer uses roughly 25 drops per 1/2 US cup for reference samples, but colour strength varies. Drop size also depends on the bottle tip. We do not give a fixed conversion per 100 g.

How long should I shake the colour before use?

The manufacturer recommends shaking vigorously for at least about one minute. The contents of the bottle must be evenly mixed before dosing.

Is Heisenberg suitable for laminated lures?

Yes. Reduced migration is particularly useful with a dark back and light belly or other contrasting layers. Always test the full combination of colours, plastisol and additives.

Is Heisenberg a UV, fluorescent or metallic colour?

Heisenberg belongs to Pearl Effects Colorant and has a pearlescent character. Being in this range does not imply a UV effect or glow in the dark.

Can I combine Heisenberg with other colours and glitter?

Yes. Use additives suitable for plastisol and start with a small trial batch when developing your own recipes. Adding another colour can change both the shade and the mixture’s migration behaviour. The NO-BLEED property cannot automatically be assumed for every combination.

→ You will find detailed technical information below in the product parameters table.

↓ Related equipment for making your own soft plastic lures is listed below the product description.