Shipping across the EU and to Norway | Secure online payment | 5% off for registered customers

Effect powder paints for lead weights

Effect powder paints from Your Mold for lead jig heads, pilkers and fishing weights. Choose a metallic, pearl or Rough textured finish to suit the appearance you want. An effect finish does not automatically mean fluorescence or afterglow; check each colour for the available pack sizes.

Bestsellers

 
from 6,11 €
 
from 6,11 €
 
from 6,11 €

Product sorting

8 items total

Price

6 €58 €
0.041008817658

Brands

8 items to display

List of products

Listing controls

8 items total

Metallic, pearl or textured: choosing an effect finish

Effect powder paint changes the appearance of a lead jig head or pilker. These finishes differ in reflection or surface texture, so the basic colour is only part of the choice. Look at the finished coating rather than just the pile of powder: metallic and pearl effects show on the coated piece, and their appearance changes with the lighting.

A guide to Your Mold effects

  • Metallic: Amber Metallic, Silver Metallic and Lava Rot for metallic reflections. Allow for the specified clear top coat with these three finishes.
  • Perl: Gold Perl and Violett Perl for a pearl effect.
  • Rough: Pinie Rough and Terra Rough for a distinctly textured surface.
  • Antik: Gold Antik for an antique-gold effect.

An effect finish is different from fluorescence or afterglow

Metallic and pearl finishes reflect incoming light; Rough describes surface texture. These names alone establish neither UV fluorescence nor a glow in the dark. Choose UV NEON for a fluorescent colour under suitable illumination and GLOW for afterglow following exposure to light. The Standard range is intended for classic single-colour finishes.

White base coats and clear top coats

Depending on the individual system, effect paints can be applied to prepared metal. At the SAF workshop we recommend a thin, compatible white base as an additional layer where appropriate; this does not override the technical data sheet. Check the selected colour because the different effects do not all use the same coating build.

The technical sheet for Amber Metallic, Silver Metallic and Lava Rot describes a two-coat metallic system with a transparent top layer. A white base does not replace it. Choose the corresponding clear lacquer and follow the requirements for the complete system, including adhesion and curing between layers. Do not automatically apply this requirement to the pearl and textured finishes.

Preparation, application and the first test jig head

  1. Clean, degrease and dry the casting, and remove burrs. An even substrate matters for the appearance of the effect.
  2. Prepare separate cups for the base, effect powder and any lacquer. Gently fluff the powder; use moderate aeration in a fluid bed.
  3. Preheat the metal evenly according to the selected paint. Apply a thin coat and keep eyes and functional openings clear.
  4. Complete the specified layers and cure. Glossy flow-out is not a universal sign of full curing.
  5. Let the test piece cool, then check appearance, adhesion and clear eyes before continuing with the batch.

Keep the application method, coating thickness and heating regime consistent. A different pack size means more or less powder, not a different effect. Consumption depends mainly on surface area and coating thickness. A smaller pack suits colour trials, while a larger one suits repeated production.

When a flexible shell is the better choice

Appearance and mechanical performance are separate properties. Even correctly cured metallic paint does not replace the flexibility of a rubber-style shell on lead that deforms. Consider rubber-style coatings for heavy weights exposed to repeated impacts. At SAF we also use a light dusting of effect powder over a rubber-style base. Test each combination on one casting and follow the requirements of both coatings; our guide explains the workshop method.

For photographs of individual effects, coating layers and the workshop method of dusting powder over a rubber-style base, read our powder and rubber coating guide. Compare other finishes in the full selection of powder paints for lead.


Frequently asked questions (FAQ)

Do metallic and pearl paints glow after the light is switched off?

A metallic or pearl effect alone does not mean afterglow. Choose the GLOW range for that property.

Does every effect paint need a clear top coat?

It depends on the colour and system. For Amber Metallic, Silver Metallic and Lava Rot, follow the two-coat metallic data sheet. Check the individual instructions for other effects.

Can a white base replace the top coat?

No. The white base sits beneath the effect and the clear top coat above it. Their functions differ and both must be compatible with the complete coating build.

Why does the powder look different from the coated piece?

Loose powder has a different surface and reflection from a flowed-out coating. Lighting, the substrate, application thickness and curing also affect the result.

Can I mix a metallic powder with another paint without testing?

We do not recommend it. Similar-looking powders are not necessarily compatible. Test a small amount and the complete process on a sample casting first.