F117 Aluminum Mold for Hering pilkers (110/130g)
Code: YM/0117Related products
Product detailed description
The Your Mold F117 aluminum mold produces Hering pilkers weighing 110/130 g. It has 2 cavities; the stated weights refer to individual lead castings.
The current F117 produces 110 and 130 g herring-shaped pilkers, replacing the older 80/100 g version. A single 100 mm through-wire shaft connects the upper and lower eyes. The manufacturer’s example uses a #2 treble and a 13.2 mm split ring; #2 must not be confused with 2/0.
Use the lightest pilker you can still control in the intended part of the water column. Increase the weight when drift, depth or line resistance causes excessive line angle. Match the rod to the fully rigged lure, including hooks and rings; nominal body weight alone is not the casting load.
For casting, use a 100 mm through-wire shaft. Use one shaft per casting. It remains inside the lure, forming the connection between its two end eyes; do not remove it after casting. Check insert seating before pouring rather than choosing a part by appearance alone.
The related products offer casting tools, mold talc, modeling clay and different coating systems. Modeling clay is an optional workshop aid, not a mandatory insert for this mold. Follow each coating manufacturer’s preparation and curing instructions; the molded eye recesses take 6 mm adhesive eyes. Do not assume hooks, rings, inserts, paint or finished lures are included simply because they appear in an illustrative photograph.
Weight and insert overview
| Nominal lead weight | Cavities | Insert used during casting | Adhesive eyes |
|---|---|---|---|
| 110 g | 1 | a 100 mm through-wire shaft | 6 mm |
| 130 g | 1 | a 100 mm through-wire shaft | 6 mm |
From the F117 mold to a finished casting
- Prepare a clean, completely dry mold, inserts and tools. Select the cavity or cavities you want to use.
- Seat a 100 mm through-wire shaft in the prepared recesses. Check that both mold halves close fully and secure them without force.
- Pour according to the instructions for the mold, metal and melting equipment. Choose pouring equipment with sufficient capacity for the selected cavity and sprue.
- After the metal has fully solidified and can be handled safely, remove the casting and let it cool. Trim the sprue and check that all attachment eyes are clear and securely anchored.
- Weigh the first casting before making a batch. Finish the surface according to the coating instructions, then fit 6 mm adhesive eyes to a clean, dry and cooled surface.
- Fit suitable rings and hooks after casting. Check free movement, connection strength and lure action in water.
The weights are nominal values for lead. Alloy composition, sprue trimming and finishing can change the final result. Weigh the first casting before making a batch. Casting equipment must safely supply enough metal for a complete selected cavity, including its sprue; you do not have to fill every cavity in one cycle.
Compare other weights and body designs in our pilker and sea-sinker mold range. Similar products are alternative molds or finished tackle, not inserts that automatically fit the F117.
Casting safety
- Never pour molten metal into a damp mold. Inserts and tools must also be completely dry.
- Wear safety glasses and suitable protective gloves; use a stable, heat-resistant workplace with effective ventilation.
- Follow the instructions for the mold, metal and melting equipment. A mold temperature limit is not a recommended pouring temperature.
- Do not eat, drink or smoke while working with lead. Keep casting equipment separate from kitchen utensils and wash your hands afterwards.
Frequently asked questions (FAQ)
How many castings does the mold produce?
2 castings per complete filling, in the nominal lead weights 110/130 g. You can use individual cavities without filling the others.
Which inserts are required?
Use a 100 mm through-wire shaft. One shaft is required per casting and remains inside the lure. Finish with 6 mm adhesive eyes.
Is this a ready-to-fish lure?
No. The mold produces the metal body. Rings and hooks are fitted afterwards, with dimensions and strength matched to the completed lure.
Does the weight determine a fixed fishing depth?
No. Current, drift, line diameter, retrieve and the complete rig determine the required weight. Choose according to actual control of the setup.
Can a different metal be used?
Only use materials and working temperatures permitted by the mold and melting-equipment manufacturers. A different metal density changes casting weight; a temperature limit is not a recommended pouring temperature.
→ For all detailed technical information, see the Parameters section below.
↓ Below the product description you will also find related and similar products to help you choose and build a complete setup.
Additional parameters
| Category: | Pilker & Saltwater Weight Molds |
|---|---|
| Designation: | F117 |
| Material: | aluminum |
| Number of castings: | 2 |
| Compatible eyes: | 6 mm |
| Compatible coating: | powder paint, rubber coating |
| Warranty: | 2 years |
| Casting Weight Range – All Molds: | Over 60 up to 120 g, Over 120 up to 200 g |
| Saltwater Casting Weight Range: | Over 60 to 120 g, Over 120 to 200 g |
| Saltwater Mold Type: | Pilker |
| Cast Type: | Pilker |
Product rating
Leave a rating
List of ratings
Miroslav Kordula
Discussion
Be the first who will post an article to this item!