Lead Casting Mold F12 – Mini Pilkers (30/40/60g)

Product detailed description

The F12 mini-pilker mold from Your Mold is designed to cast three compact pilkers weighing 30, 40 and 60 g. Depending on the weight, the finished castings are 75 or 85 mm long. The three separate cavities let you cast only the selected weight or produce a complete graduated set in one working session.

The compact proportions combine a relatively small profile with substantial weight. This helps the pilker maintain contact during vertical lift-and-drop presentations, controlled descents and short cast-and-retrieve presentations. The manufacturer also mentions perch as a target species; always match the hooks, split rings and presentation style to the fish, water and conditions.

The 30 g version is suitable for shallower water, weaker current or a more subtle presentation. The 40 g version is the versatile middle option, while 60 g provides extra weight for deeper water, stronger current or a faster descent. A practical rule is to use the lightest weight that still gives you reliable lure contact and holds the required depth.

Each cavity takes two size 1 loops—one at the head and one at the tail of the pilker. Casting all three cavities therefore requires six loops in total. The shaped recesses on the head are designed for 5 mm adhesive eyes.

The stated weights of 30, 40 and 60 g refer to castings made from lead. Using another low-melting metal or alloy will change the finished weight according to the material's density. The manufacturer specifies the mold for low-melting metals with working temperatures up to approximately 500 °C; this is a material limit, not a recommended pouring temperature.

Size 1 loops are the essential inserts for this mold. The 5 mm adhesive eyes, casting metal, melting equipment, hooks, split rings, coatings and other finishing materials are selected separately according to the intended lure setup.

Frequently asked questions about the F12 mold

Can I cast only one of the available weights?

Yes. The mold has three separately filled cavities, so you can cast only the selected 30, 40 or 60 g pilker. The unused cavities do not need to be filled.

How do I choose between 30, 40 and 60 g?

Start with the lightest weight that still lets you feel the lure reliably and maintain the required depth. Move to 40 or 60 g when fishing deeper water, stronger current or whenever you begin to lose contact.

Which loops and adhesive eyes fit the mold?

Each cavity takes two size 1 loops, so six loops are required when using all three cavities. The shaped recesses on the head fit 5 mm adhesive eyes.

Is the F12 only suitable for saltwater fishing?

No. It is a compact pilker-style lure that can also be used in freshwater when rigged and presented appropriately. The manufacturer explicitly mentions perch and other predatory fish.

Can I use a metal other than lead?

The manufacturer specifies the mold for low-melting metals up to approximately 500 °C. Always set the working temperature according to the selected material and equipment. A metal with a different density will also change the finished casting weight.

→ All detailed technical information can be found below in the Product parameters table.

↓ Below the product description you will also find related and similar products to help you choose and build a complete setup.