VMC 9147 BN #8 Jig Hook

Product detailed description

The VMC 9147 BN #8 Jig Hook suits small soft jerkbaits and paddle tails for finesse perch fishing. Compared with #10, it places the point farther along the solid part of the body when the lure requires it. On a slim soft jerkbait, leave the rear section free to work; on a small paddle tail, also check the body depth around the hook bend. Move up to #8 to improve how the lure is rigged, rather than automatically choosing it for a heavier jig head.

When rigged, the soft lure must sit straight on the shank and leave the hook bend and point enough room to work. On a slim soft jerkbait, keep the rear section free to move; on a deeper-bodied paddle tail, also check the space inside the hook bend. Before casting a batch, always test the actual hook in a dry mould and make sure the mould closes fully.

Choosing a mould and using size #8

For the VMC 9147 BN #8, choose a mould that explicitly lists this model and size. A similar cavity shape or matching hook angle does not establish compatibility on its own. During a trial fitting, the hook should sit in place without forced bending and the mould must close fully.

The pack contains 20 or 100 VMC 9147 BN hooks in size #8, depending on the selected variant. The smaller pack suits testing a particular setup; the larger pack suits repeated production of jig heads with the same hook.

For casting your own jig heads, you can add an RCBS Easy-Melt 240V melting pot or a Lyman Big Dipper 230V. Finish the cast heads with the Amigo fluid bed and powder paints for lead.

Technical note: The VMC 9147 has a Regular shank and a Flat Eye Jig eye with a 90° front bend. Eagle Claw 570B, VMC 5150 and VMC 7161 in the similar products section are included for comparing designs. They are not automatically interchangeable; the VMC 7161 also has 60° geometry. Check the mould specification again whenever you change hook model.

Frequently asked questions about VMC 9147 BN #8

When should I move from #10 to #8?

When you need the point to exit farther along the solid part of the same lure body.

What does Aberdeen Jig 90° mean?

It is a classic Aberdeen jig hook with a 90° front bend. The design is intended for making conventional jig heads.

What does BN mean?

BN stands for the Black Nickel finish. It does not describe the hook shape or a strength rating.

Can I replace a VMC 9147 with a VMC 5150 of the same size?

Not automatically. Both models have a 90° front bend, but the hook bend, shank and eye differ. Always check compatibility with the particular mould.

How can I tell whether a soft lure is rigged correctly?

The lure should sit straight behind the head, the point should exit through a solid section of the body, and the active rear section must remain free.

→ All detailed technical information is available below in the Product parameters table.

↓ Below the product description, you will also find related and similar products to help you choose and put together a complete setup.