Your Mold F51 drop-shot sinker mold (10–70 g)
Code: YM/0051Related products
Product detailed description
The Your Mold F51 aluminum mold produces separate terminal sinkers for drop-shot rigs. Its 7 cavities provide nominal weights of 10 / 20 / 30 / 40 / 50 / 60 / 70 g. You can fill each cavity independently; the listed weights refer to individual castings.
F51 spans 10–70 g in 10 g steps, allowing you to adjust the load of the same rig type across a broad range. Compare F81 (10–45 g) when you need smaller steps in the middle of that range.
In a drop-shot rig, the hook and soft lure sit above a separate sinker. Select the load to suit depth, current, casting distance and bottom contact; lure size alone does not determine the required weight. A particular sinker weight does not guarantee suitability for a fixed fishing depth.
Fit the specified VMC size 8 swivel during casting. Seat the embedded part in its recess and keep the exposed eye or clip accessible and functional. Check that the mold closes fully without force. The same size number in another swivel range does not by itself confirm compatibility.
A VMC size 8 swivel is listed for a conventional eye connection. For a drop-shot line clip, select a matching insert for the actual mold recess; conventional and clip swivels cannot be interchanged solely by similar size numbers. Finish the cleaned casting with a rubber lead coating according to the coating manufacturer’s instructions.
Swivels and finishing accessories are sold separately. The insert remains part of the casting; this construction does not require a guide pin or a PVC tube.
Weight and insert overview
| Nominal weight | Cavities | Insert during casting | Finishing |
|---|---|---|---|
| 10 g | 1 | VMC size 8 swivel | Trim the sprue; check the swivel |
| 20 g | 1 | VMC size 8 swivel | Trim the sprue; check the swivel |
| 30 g | 1 | VMC size 8 swivel | Trim the sprue; check the swivel |
| 40 g | 1 | VMC size 8 swivel | Trim the sprue; check the swivel |
| 50 g | 1 | VMC size 8 swivel | Trim the sprue; check the swivel |
| 60 g | 1 | VMC size 8 swivel | Trim the sprue; check the swivel |
| 70 g | 1 | VMC size 8 swivel | Trim the sprue; check the swivel |
From the F51 mold to a finished sinker
- Prepare a clean, completely dry mold, swivels and tools. Select the required cavity.
- Seat the VMC size 8 swivel in its recess. Check full closure and secure the mold without force.
- Cast according to the instructions for the mold, metal and melting equipment. Keep line and plastic rig parts away from molten metal.
- Once the metal has solidified and can be handled safely, remove the casting. The swivel remains embedded in the lead.
- Trim the sprue and sharp edges. Check that the insert is firmly anchored and its working part can move freely.
- Weigh the first casting and test the complete rig before producing a larger batch.
The listed weights are nominal. Metal composition and finishing affect actual weight. Keep within the load rating of your rod and tackle. Lead release when snagged depends on the insert and complete rig; the mold alone does not guarantee it.
Casting safety
- Never pour molten metal into a damp mold. Inserts and tools must also be completely dry.
- Wear safety glasses and suitable protective gloves. Use a stable, heat-resistant work area with effective ventilation.
- Follow the instructions for the mold, metal and melting equipment. The mold temperature limit is not a recommended pouring temperature.
- Do not eat, drink or smoke when working with lead. Keep casting equipment separate from kitchen utensils and wash your hands afterwards.
Frequently asked questions (FAQ)
Which weights does F51 produce?
7 separate cavities: 10 / 20 / 30 / 40 / 50 / 60 / 70 g. You do not have to fill all cavities at once.
Which swivel does the mold use?
VMC size 8 swivel. Test the actual insert in its recess and check full closure; similar appearance or size numbering from another range does not guarantee compatibility.
What is included?
The aluminum mold. Swivels, coatings and other accessories are sold separately.
Is the hook cast into the lead?
No. This is a separate terminal sinker, not a jig head. Tie the hook and lure on the leader above the sinker and set the spacing to suit the desired lure position.
When should I choose another mold?
F51 spans 10–70 g in 10 g steps, allowing you to adjust the load of the same rig type across a broad range. Compare F81 (10–45 g) when you need smaller steps in the middle of that range.
→ See the Additional parameters section for technical details.
↓ Find related and similar products below the description.
Additional parameters
| Category: | Drop Shot Sinker Molds |
|---|---|
| Designation: | F51 |
| Material: | aluminum |
| Number of castings: | 7 |
| Compatible swivel: | vel. 8 drop shot |
| Compatible coating: | rubber coating |
| Warranty: | 2 years |
| Casting Weight Range – All Molds: | Up to 10 g, Over 10 up to 30 g, Over 30 up to 60 g, Over 60 up to 120 g |
| Freshwater Casting Weight Range: | Up to 30 g, Over 30 to 60 g, Over 60 to 100 g |
| Cast Type: | Sinker |
| Freshwater Casting Type: | Drop Shot |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
