F30 inline lead mold (20–60g)
Code: YM/0030Related products
Product detailed description
Your Mold F30 lead mold produces inline leads with a through passage in a hexagonal pear profile. The 5 cavities have nominal casting weights of 20 / 30 / 40 / 50 / 60 g. You can use the required cavity without filling all the others. This lets you make a supply matched to your tackle and the fishing location.
Inline F30 offers 20–60 g in a hexagonal body. Compare F197 for a smooth pear profile at the same weights, or F69 for 70–100 g. Test the line passage through the complete rig with your chosen stops and swivel.
Flat sides can reduce rolling compared with a smooth rounded lead. Actual holding depends on the slope and hardness of the bottom, current and line tension. Use the lightest load that gives the required control and keep within the casting limits of your rod and complete tackle. A mold shape alone does not guarantee a casting distance or a fixed fishing depth.
Fit the included 5 metal guide pins, Ø 3.2 mm, before casting. They form the through passages and are withdrawn after the metal solidifies; they are not part of the finished fishing rig. Once the casting is cool and deburred, fit a separately sold 3 mm PVC tube in Dark brown or Dark green. Check the tube ends and free line movement in the assembled rig. Do not pour molten metal around a PVC tube.
Weight and insert overview
| Nominal casting weight | Cavities | Insert during casting | Finishing |
|---|---|---|---|
| 20 g | 1 | removable 3.2 mm guide pin | Withdraw pin; fit PVC liner after cooling |
| 30 g | 1 | removable 3.2 mm guide pin | Withdraw pin; fit PVC liner after cooling |
| 40 g | 1 | removable 3.2 mm guide pin | Withdraw pin; fit PVC liner after cooling |
| 50 g | 1 | removable 3.2 mm guide pin | Withdraw pin; fit PVC liner after cooling |
| 60 g | 1 | removable 3.2 mm guide pin | Withdraw pin; fit PVC liner after cooling |
From the F30 mold to a finished lead
- Prepare a clean, completely dry mold, inserts and tools. Choose the required cavity.
- Seat the specified removable 3.2 mm guide pin and check complete, secure closure without force.
- Cast according to the instructions for the mold, metal and melting equipment. Keep all plastic parts away from molten metal.
- After solidification, remove the casting safely, withdraw the guide pin and allow the lead to cool.
- Deburr the passage and fit the chosen PVC liner into the cooled casting.
- Weigh and inspect the first casting, then test the complete rig before continuing with a larger batch.
Nominal weights refer to one casting, not the total output of the mold. The metal used and finishing affect actual weight, so weigh the first casting from each cavity you use and check it against the capacity of the complete setup.
A through hole alone does not guarantee a free-running or drop-off rig. Test the tube, swivel, stops and hooklink together. Finish the cleaned lead with a rubber lead coating according to the manufacturer’s instructions, keeping the passage clear. PVC tubes, coating and other finishing accessories are sold separately.
Casting safety
- Never pour molten metal into a damp mold. Inserts and tools must also be completely dry.
- Wear safety glasses and suitable protective gloves; use a stable, heat-resistant workplace with effective ventilation.
- Follow the instructions for the mold, metal and melting equipment. A mold temperature limit is not a recommended pouring temperature.
- Do not eat, drink or smoke while working with lead. Keep casting equipment separate from kitchen utensils and wash your hands afterwards.
Frequently asked questions (FAQ)
How many leads does one mold produce?
5 leads if all cavities are filled, with nominal weights of 20 / 30 / 40 / 50 / 60 g. You may cast individual cavities.
Which insert is required?
Use the specified removable 3.2 mm guide pin. Remove the metal guide pin after casting.
What is supplied?
The aluminum mold and 5 removable metal guide pins, Ø 3.2 mm. Other accessories are sold separately.
When should I choose a different mold?
Compare F197 and F69 for another load range, body shape or attachment. Check each mold’s own insert requirements.
→ See the Additional parameters section for technical details.
↓ Find related and similar products below the description.
Additional parameters
| Category: | Horizon & Pear Lead Molds |
|---|---|
| Designation: | F30 |
| Material: | aluminum |
| Compatible PVC tube: | 3 mm |
| Number of castings: | 5 |
| Compatible coating: | rubber coating |
| Warranty: | 2 years |
| Casting Weight Range – All Molds: | Over 10 up to 30 g, Over 30 up to 60 g |
| Freshwater Casting Weight Range: | Up to 30 g, Over 30 to 60 g |
| Cast Type: | Sinker |
| Freshwater Casting Type: | Hexagonal |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
