VMC 5150 BN

VMC 5150 BN Barbarian Large Eye Jig 90° is a jig hook with the distinctive Barbarian bend, enlarged eye and 90° front bend. Its construction uses high-carbon steel, a Needle Cone point and the Technical Locking Curve geometry. The BN designation refers to the Black Nickel finish.

Do not choose the hook size according to jig-head weight. The hook primarily determines how the soft plastic lure is rigged – shank length, hook-point exit position and the amount of free space inside the hook bend. Jig-head weight should instead be selected according to depth, current, drift, rate of fall and the required presentation. The same correctly rigged lure can therefore be used with several different jig-head weights.

The characteristic Barbarian bend uses a geometry referred to as Technical Locking Curve. When rigging a soft bait, it is important to leave enough free space between the lure body and the hook point. With deeper-bodied shads, check not only shank length but also the depth of the lure body. With slimmer minnows, the hook-point exit position and the amount of free-moving lure body are particularly important.

When selecting the size, place the hook alongside the soft plastic lure and determine where the hook point should exit. A hook that is too short positions the point unnecessarily far forward, while an excessively long shank can extend into the active part of the lure and restrict its action. Use the numerical hook size only as a guide.

With VMC 5150, dimensions should not be estimated only from the neighbouring hook size. Moving from one size to another does not necessarily mean a simple increase in shank length. Overall geometry, bend clearance and the position of the hook point relative to the lure also change. Do not automatically choose a larger hook simply because you want to cast a heavier jig head.

The enlarged Large Eye is one of the characteristic features of the 5150 series. It makes threading leader material and handling easier, but when casting your own jig heads it also requires sufficient clearance inside the mold. After casting and any powder coating, always check that no lead or paint remains inside the eye and restricts the opening.

VMC 5150 BN is suitable for anglers who cast their own jig heads. Before pouring lead, always place the exact hook size into the exact mold cavity and check the fit without lead. The shank, bend and eye must sit correctly and both halves of the mold must close completely without placing pressure on the hook.

A 90° designation does not mean that all 90° jig hooks are interchangeable. Different hook series may vary in shank length, bend position, wire diameter, eye size and the distance between the front bend and the hook axis. Compatibility should therefore always be verified for the exact VMC 5150 BN size and the exact mold cavity.

For individual hook sizes on SAF, we list specifically verified mold combinations. For example, size 1/0 is verified for F46, size 2/0 for F46, F135 and F133, while other sizes have their own confirmed combinations. Compatibility confirmed for one size must never be automatically transferred to another size or to every cavity in the same mold. Browse the complete range in our jig head molds category.

The Black Nickel BN version and the red VMC 5150 RD are based on the same 5150 design concept. When comparing them, however, always work with the same hook size and the specific mold. The finish can help match the appearance of the finished jig head and lure, but it does not determine mold compatibility or whether the hook is suitable for a specific soft bait.

VMC 5150 can be used for both freshwater and saltwater spinning. Sizes 1/0 to 3/0 cover standard jigging setups for smaller and medium-sized soft baits, sizes 4/0 to 6/0 extend the range towards larger lures and stronger applications, while 10/0 is intended for considerably larger soft plastics and corresponding jig heads.

Each VMC 5150 BN size is listed as a separate product, making it possible to match the hook precisely to the soft plastic lure, mold and required jig-head weight. Other hook designs, eye angles and finishes can be found in our main jig hooks category.

Frequently asked questions – VMC 5150 BN

What does BN mean on VMC 5150?

BN refers to the Black Nickel finish. The red alternative within the same design series is VMC 5150 RD.

Which VMC 5150 BN sizes does SAF offer?

This category includes sizes 1/0, 2/0, 3/0, 4/0, 5/0, 6/0 and 10/0. Each size is listed as a separate product.

How do I choose the correct VMC 5150 BN size for a soft plastic lure?

Place the hook directly alongside the lure and check the shank length, hook-point exit position, lure body depth and free space inside the bend. Two lures of the same length may require different hook sizes because of differences in body profile.

Does jig-head weight determine the hook size?

No. Hook size is determined mainly by the lure and the required rigging. Jig-head weight should be selected according to depth, current, drift, rate of fall and presentation style.

What is the Barbarian Technical Locking Curve?

It is the characteristic geometry of the angled Barbarian bend. When rigging a lure, enough free space must remain below the hook point so the hook can work correctly during the strike.

Why does VMC 5150 have an enlarged eye?

Large Eye is a characteristic design feature of the 5150 model. The larger eye makes threading leader material and handling easier, but when casting it must also sit correctly in the corresponding section of the mold.

Is VMC 5150 BN suitable for casting your own jig heads?

Yes. Before casting, always test the exact hook size directly in the appropriate mold cavity. The mold must close completely and the hook must sit correctly in the prepared grooves.

Is VMC 5150 BN compatible with every mold designed for 90° hooks?

No. Eye angle is only one part of the hook geometry. Shank length, bend position, wire diameter and the size and position of the eye also matter. Compatibility should therefore be checked for the exact hook size and the exact mold cavity.

What is the difference between VMC 5150 BN and VMC 5150 RD?

The main difference is the finish – BN uses Black Nickel, while RD is the red version. Both belong to the same 5150 design series. When comparing dimensions and mold compatibility, always work with the same hook size.

Is VMC 5150 BN suitable for saltwater fishing?

Yes. Larger sizes are particularly suitable for larger saltwater soft baits, always depending on the specific lure, jig mold, jig-head weight and the required load of the complete setup.

→ Browse other designs and sizes in our jig hooks category.

→ For casting your own jig heads, choose a suitable jig head mold and always verify the exact combination of mold, jig-head weight and hook size.