VMC 5150 BN 1/0 Jig Hook
Code: YM/2201Related products
Product detailed description
VMC 5150 BN 1/0 is the Black Nickel option for smaller fish-shaped jig heads and slimmer soft plastics. Size 1/0 is a useful starting point for smaller fish-shaped jig heads rigged with paddle tails and soft jerkbaits. For perch and zander fishing, it suits rigs where you want to leave more of the lure free to move while the point emerges through the firmer front section of the body. Making your own heads lets you adjust the weight to the current and your retrieve.
The dimension image shows an overall length of approximately 35 mm. The exposed shank behind the cast head will be shorter, so do not use the overall length alone to decide where the point will emerge without laying the hook alongside the lure. For a longer or deeper body, compare size 2/0. If the smaller hook holds the lure correctly and leaves the gape clear, a heavier head does not in itself require a larger hook.
VMC 5150 construction
The 5150 Barbarian Large Eye Jig 90° model uses high-carbon steel (Hi-Carbon Steel) and a Needle Cone point. Its construction differs from the 7161 and 6198 ranges. Their point designations and recommended mould pairings do not automatically apply to the 5150.
The angular Barbarian bend creates the distinctive lower section of the hook, which the manufacturer calls the Technical Locking Curve. After rigging, there must be sufficient clearance between the shank and point. With a deep-bodied paddle tail, also assess body depth. With a slim soft jerkbait, pay particular attention to where the point emerges and whether the rear section remains free to move.
Compatible moulds for VMC 5150 BN 1/0
- F46 – 10/14/19/26 g
The listed weights refer to lead castings. Unless explicitly stated otherwise, the recommendations apply to the mould as a whole and do not mean that every hook fits every cavity. Before casting, check that the specific hook is seated correctly and the mould closes fully.
The 90° front bend determines the hook placement and the position of the eye in the head. The angle alone does not determine the lure’s position in the water. Head shape and centre of gravity, lure resistance, current and direction of pull also matter. The large eye makes threading the leader and tying knots easier. After finishing the head, check that no metal or paint remains in the eye.
BN stands for the Black Nickel finish
BN denotes the Black Nickel finish. The VMC 5150 RD range is the red alternative with the same construction. Where the required size is available in both finishes, always compare the same size. The finish helps you match the appearance of the rig, but does not by itself guarantee more bites or compatibility with any mould. The VMC 7161 BN and VMC 6198 TI ranges use a different layout with a 60° bend. Check their use against the mould specification.
Making your own jig heads lets you prepare several weights for the same lure. The hook determines how the lure is rigged; the head weight determines how it can be presented. As the current increases, add only enough weight to maintain the intended path and contact. In midwater, a slower fall may keep the soft plastic at the level of the fish for longer. Weight therefore cannot be reliably matched to depth alone.
Before casting a larger batch, place the hook in a dry mould and check that it closes fully. After making the first head, check that the hook is securely anchored, the eye is clear and the lure sits straight. The hook is not intended to be reshaped to compensate for an unsuitable hook recess. Follow the instructions for the mould, casting metal and melting equipment.
After contact with rocks, check the point and look for any opening of the bend. After saltwater use, rinse the rig with fresh water and let it dry. When playing a fish, the hook works together with the rod, drag and leader. The numerical hook size alone does not specify a guaranteed load capacity.
Frequently asked questions about VMC 5150 BN 1/0
Do I need a larger hook for the heaviest F46 head?
No. Do not choose hook size by head weight alone. The lure body and correct fit in the selected cavity are what matter. F46 supports several hook sizes across the mould as a whole.
What does the large eye offer?
It makes threading the leader and tying knots easier. The eye must remain clean and open after casting and painting. Eye size alone does not indicate hook strength.
Does the 90° bend guarantee a horizontal lure position?
No. The angle describes the front bend of the hook. The actual position in the water also depends on the head shape and centre of gravity, lure rigging, direction of pull and current.
Can I choose the same design with a red finish?
Yes. For sizes available in both finishes, compare the corresponding VMC 5150 RD. It is the same 5150 construction with a red finish. Check mould compatibility again when switching to a different hook model.
How do I recognise a correctly rigged lure?
The soft plastic sits straight behind the head, the point emerges through the solid part of the body and the gape remains clear. The tail and other active parts of the lure should be free to move.
→ You will find detailed technical information in the Product parameters table below.
↓ Related and similar products below the description will help you choose and put together a complete setup.
Additional parameters
| Category: | VMC 5150 BN |
|---|---|
| Warranty: | 2 years |
| Package contains: | 10 pcs, 100 pcs |
| Hook Size: | 1/0 |
| Colour: | Black Nickel |
| Warranty: | 2 years |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!