Powder Paint Fluid Bed Extension Cup XL

Product detailed description

Powder Paint Fluid Bed Extension Cup XL is a steel extension part designed for the compatible Powder Paint Fluid Bed XL. It fits onto the upper part of the fluid bed and increases its working height. This makes the setup much more practical when coating longer pilkers, elongated fishing weights, larger cheburashka weights and other lead castings that need more space during dipping.

The standard XL fluid bed already offers a larger diameter, a stable steel body and much better working comfort than small plastic cup-style fluid beds. The XL extension cup takes this setup even further, because it extends the fluid bed upwards and allows more controlled handling of longer or more shaped castings. This is especially important for sea fishing pilkers and longer lead weights where limited working space can make dipping less accurate.

The extension has a length of 140 mm. When fitted to the compatible XL fluid bed, it creates a usable working depth of approximately 240 mm. In practice, this gives you more space above the coating layer, so the lead casting can be guided into the fluidised paint more smoothly, with less risk of hitting the rim or disturbing the evenly fluidised powder or coating layer.

The XL extension cup makes the most sense when working with longer castings. If you are coating small jig heads or short sinkers, the standard height of the fluid bed may be enough. But when you start coating longer pilkers, elongated sea fishing weights, larger cheburashka weights or more shaped lead castings, the increased working height makes the whole process calmer, cleaner and more precise.

The extra height is also useful when working with rubber coatings for lead, which require more stable fluidisation and more controlled dipping than fine powder paint. The extension itself does not increase the power of the setup, but it provides more working space. For rubber coatings, it is important to use a suitable air source, ideally the Hailea ACO-208 Compressor for Rubber Coating, which provides enough reserve for heavier coating material.

When does the Powder Paint Fluid Bed Extension Cup XL make the most sense?
– when coating longer sea fishing pilkers,
– when coating elongated fishing weights,
– for larger cheburashka weights and more shaped lead castings,
– when the standard fluid bed height is not enough for comfortable dipping,
– when working with powder paints and rubber coatings for lead,
– when you want to turn the XL fluid bed into a more serious workshop setup for larger sea fishing castings.

The extension cup is not a fluid bed on its own. It is an accessory for the compatible XL fluid bed, and its purpose is to increase the working height of the fluidised coating area. The paint is still fluidised by the fluid bed itself, connected to a suitable air pump or compressor according to the type of coating used.

With powder paints for lead, the XL fluid bed and extension cup create a fast, clean and practical setup. With rubber coatings, you need to take the higher air demand into account, because rubber coating is heavier than fine powder paint and requires stable airflow with enough performance reserve. This is why the combination of Powder Paint Fluid Bed XL + XL extension cup + Hailea compressor makes sense for more regular coating of pilkers, cheburashka weights and larger sea fishing weights.

Recommended basic workflow
1. Fit the XL extension cup onto the upper part of the compatible XL fluid bed.
2. Pour a suitable amount of lead coating paint into the fluid bed.
3. Connect the correct air pump or compressor according to the coating type.
4. Adjust the airflow so the paint is lifted evenly and not blown out of the cylinder.
5. Preheat the lead casting to the correct working temperature.
6. Dip the casting briefly and carefully into the fluidised coating layer.
7. Let the coating melt onto the surface and, depending on the coating type, carry out final curing if required.

Powder Paint Fluid Bed Extension Cup XL is recommended for anyone who wants to get the most out of the larger XL fluid bed and regularly coat longer pilkers, elongated weights or larger lead castings. In combination with the XL fluid bed, it helps create a more stable and usable working space for serious lead coating work.

→ All detailed technical information can be found below in the Product Parameters table.

↓ Below the product description you will also find related and similar products that will help you choose the right setup and complete your workshop equipment.