Amigo Replacement Plastic Cup

Product detailed description

Amigo Replacement Plastic Cup is a spare and exchange cup for the compatible Amigo fluid bed. It is designed for working with lead coating paints, especially when coating jig heads, smaller pilkers, cheburashka weights, carp leads and other fishing weights.

The replacement cup is most useful when you work with several colours and do not want to empty, clean and prepare the same cup again every time you change shade. Each colour can be kept in its own cup, making the coating process faster, cleaner and easier to manage.

The Amigo exchange cup helps speed up work when coating lead castings. For example, if you are coating a batch of jig heads in several colours, you can prepare one cup for one powder paint, another cup for a different shade and switch them in the fluid bed setup as needed. This is especially practical when testing colours, making smaller batches or preparing several colour variants.

The cup is also useful as a spare part for regular fluid bed use. During work, the plastic cup is exposed to paint, handling, cleaning and normal workshop use. Having a replacement cup ready is a simple way to keep the setup running if the original cup becomes damaged, dirty or worn.

Within the Amigo system, the replacement cup is one of the key accessories. The Amigo fluid bed provides the actual fluidised paint layer, the Amigo extension adapter increases the working height when coating longer castings, and the Amigo replacement plastic cup makes it easier to work with multiple colours or quickly replace the cup.

With fine powder paints, an exchange cup is especially useful because each powder can stay separated. When working with lead coating paints, cup cleanliness matters. Residue from another colour can affect the final shade, contaminate light colours or make the coating result less repeatable.

The cup can also be used when working with rubber coatings for lead, depending on the complete fluid bed setup. Rubber coating is heavier than fine powder paint and requires a sufficiently strong and stable air source for proper fluidisation. The cup itself does not increase the performance of the setup, but it helps keep work organised and separates individual colours or material types.

When does the Amigo replacement cup make the most sense?
– when working with several powder paint colours,
– when you do not want to clean the same cup after every colour change,
– as a spare part for the Amigo fluid bed,
– when testing colours and coating smaller batches,
– for separating light, dark and strong colour shades,
– during regular coating of jig heads, pilkers and fishing weights.

Recommended basic workflow
1. Prepare a separate cup for a specific colour.
2. Pour a suitable amount of lead coating paint into the cup.
3. Use the cup in the compatible Amigo fluid bed.
4. Connect the correct air pump or compressor according to the paint type.
5. Adjust the airflow so the paint is gently lifted and not blown out of the cup.
6. After use, empty the cup or keep it assigned to the same colour, depending on how you store your paint.

Amigo Replacement Plastic Cup is recommended for anyone who uses the Amigo fluid bed regularly or works with several colours. It is a simple but very practical accessory that saves time, reduces colour contamination and helps keep the coating of lead castings clean and organised.

→ All detailed technical information can be found below in the Product Parameters table.

↓ Below the product description you will also find related and similar products that will help you choose the right setup and complete your workshop equipment.