Gamakatsu JIG 90

Gamakatsu Jig 90 is a heavy-duty jig hook with a 90° eye, designed for making jig heads and fishing with soft plastic lures. SAF offers sizes 1/0, 2/0, 3/0, 4/0, 5/0 and 6/0, allowing you to select the right hook length and size for anything from smaller soft baits to considerably larger lure profiles.

Do not choose the hook size according to jig-head weight. The main factors are the length and profile of the soft bait, the point where the hook should exit the body and the amount of free space between the lure and the hook bend. The same soft bait can be used with several different jig-head weights depending on depth, current or the required rate of fall.

Gamakatsu Jig 90 uses strong wire and a dark NS Black finish. Its construction is intended for jig fishing where hook strength and reliable holding power under load are important. The range can be used for both freshwater and saltwater fishing, but the individual size should always be matched to the target species, lure and fishing method.

When selecting the size, place the hook alongside the lure and determine in advance where the hook point should exit through its back. A hook that is too short can position the point unnecessarily far forward, while an excessively long shank can extend into the active section of the lure and restrict its natural action. Use the numerical hook size as a guide rather than as a substitute for actually matching the hook to the bait.

With deeper-bodied soft baits, also check the hook gap. After rigging, there must be enough free space between the lure body and the hook for a reliable hook-up. Two soft baits of the same overall length may therefore require different hook sizes because of differences in body profile.

Gamakatsu Jig 90 is also suitable for anglers who cast their own jig heads. Before pouring lead, place the exact hook size into the mold without lead and check the actual fit. The shank must sit correctly in the groove, the eye must be positioned properly and both halves of the mold must close completely without resistance.

A 90° eye does not mean that all 90° jig hooks are interchangeable. Different hook series may vary in shank length, bend position, hook gap, wire diameter and the distance between the eye and the hook axis. Gamakatsu Jig 90 therefore cannot automatically be considered a direct replacement for a VMC 5150 simply because both use a 90° eye or carry the same numerical hook size.

When using the hook in a lead casting mold, always verify compatibility for the exact hook size and the exact mold cavity. This is especially important with molds designed for several hook sizes or several jig-head weights in one mold body. You can find the complete selection in our jig head molds category.

After saltwater use, rinse the finished jig heads with fresh water and allow them to dry thoroughly. Before the next fishing session, check the hook point, eye and surface condition. Mechanical damage to the finish or contact with other metal components may locally reduce surface protection.

Each Gamakatsu Jig 90 size is listed as a separate product. This makes it easier to match the exact hook to your soft bait, jig mold and intended use without creating an unnecessarily complicated multi-variant product. To compare other hook geometries, finishes and size ranges, continue to our main jig hooks category.

Frequently asked questions – Gamakatsu Jig 90

Which Gamakatsu Jig 90 sizes does SAF offer?

This category includes sizes 1/0, 2/0, 3/0, 4/0, 5/0 and 6/0. Each size is listed as a separate product.

How do I choose the correct hook size for a soft plastic lure?

Place the hook alongside the lure and check the hook-point exit position, shank length, lure body depth and free space within the hook gap. Two lures of the same length do not necessarily require the same hook size.

Does jig-head weight determine the hook size?

No. Jig-head weight is selected mainly according to depth, current, rate of fall and presentation style. Hook size should primarily match the lure and the required hook placement.

Is Gamakatsu Jig 90 suitable for casting your own jig heads?

Yes. Before casting, however, always test the exact hook size directly in the mold. The mold must close completely and the hook must sit correctly in the prepared grooves.

Is Gamakatsu Jig 90 compatible with every mold designed for 90° hooks?

No. Eye angle is only one part of hook geometry. Shank length, bend shape, wire diameter, hook gap and eye position may differ, so compatibility must always be checked directly in the specific mold.

Is Gamakatsu Jig 90 the same as VMC 5150?

No. Both series use a 90° eye orientation, but their overall geometry may differ. The same numerical size therefore does not automatically mean identical dimensions or compatibility with the same mold.

Can Gamakatsu Jig 90 be used in saltwater?

Yes. After saltwater use, we recommend rinsing the jig head with fresh water, drying it thoroughly and checking the hook point and surface condition before the next fishing session.

→ Browse other sizes and designs in our jig hooks category or choose a suitable jig head mold for casting your own jig heads.