Gamakatsu Jig 90 1/0 Jig Hook

Product detailed description

Gamakatsu Jig 90 1/0 is the smallest size in our Jig 90 selection. It suits smaller to medium-sized soft lures when you want to keep the rear section free while using a stronger 90° jig hook. It is particularly useful for perch and lighter zander fishing. Choose the size according to the depth of the lure body and where the point should exit, rather than just the weight of the planned jig head.

The soft lure should sit straight behind the jig head. The point should exit through a solid section of the body, leaving enough space between the lure and the hook bend for a secure hookset. With a slim soft jerkbait, focus on where the point exits. With a deeper-bodied paddle tail, also check that the lure body does not fill too much of the hook bend.

Before casting a batch, always test the particular hook size in a dry mould. The hook must sit correctly in its groove, and the mould must close freely and fully. If the hook does not fit, do not bend it to suit the mould. Use the correct hook instead.

The same 90° front bend does not make this hook automatically interchangeable with the VMC 5150 RD or VMC 5150 BN. These are different model ranges, and compatibility must be checked for the particular mould.

To choose a mould, browse our jig head moulds. This category link does not confirm that any particular mould is compatible with this hook.

The original retail pack contains 25 Gamakatsu Jig 90 hooks in size 1/0.

Frequently asked questions

When should I choose 1/0 instead of 2/0?
When a smaller or slimmer soft lure needs a shorter hook and the point of a 2/0 would exit too far back. The right size leaves the active rear section of the lure free.

Is the Gamakatsu Jig 90 suitable for salt water?
Yes. The manufacturer explicitly recommends the Jig 90 range for fresh and salt water. After use at sea, rinse the rig with fresh water and let it dry.

What does NS Black mean?
NS Black is the name Gamakatsu uses for the dark finish on this European product range. At SAF, we retain the manufacturer's original designation.

Is the Gamakatsu Jig 90 the same as the VMC 5150?
No. Both ranges have a 90° front bend, but they are different models. The same hook size does not automatically guarantee compatibility with the same mould.

How do I choose the right hook size?
Choose the hook according to the length and depth of the soft lure and where the point should exit. Jig head weight alone does not determine hook size.

→ All detailed technical information is available below in the Product parameters table.

↓ Below the product description, you will also find related and similar products to help you choose and put together a complete setup.