F43 combined lead mold (100–140g)
Code: YM/0043Related products
Product detailed description
Your Mold F43 aluminum lead mold produces swivel and inline leads. It has 3 cavities for nominal weights of 100 / 120 / 140 g. Fill individual cavities as needed.
The combined F43 covers 100, 120 and 140 g. Its insert configuration determines whether you cast an inline or swivel lead, allowing different rigs within the same mold family. F57 is a heavier combined alternative; compare F58 for dedicated inline leads at 70–100 g.
The shaped contact surface can help limit rolling and movement on the bottom. Actual holding depends on lead weight, bottom hardness and slope, current and line pull. Choose the weight for your fishing conditions and the load limits of the rod and complete rig; the profile alone does not guarantee holding or a casting distance.
For a swivel lead, fit a size 8 or 6 swivel to the relevant groove. For an inline lead, use a removable metal pin. Pull the pin out after the metal sets, then fit a separately sold 3 mm PVC tube into the cool, finished casting. These configurations do not make complete rigs automatically interchangeable. Finish the cleaned casting with a rubber lead coating according to the coating manufacturer’s instructions.
Cast-in attachment parts and finishing accessories are selected separately for the specific construction.
Weight and insert overview
| Nominal weight | Cavities | Insert for casting | Finishing |
|---|---|---|---|
| 100 g | 1 | size 8 or 6 swivel for swivel leads; a metal pin for inline leads | Remove pin; fit liner after cooling |
| 120 g | 1 | size 8 or 6 swivel for swivel leads; a metal pin for inline leads | Remove pin; fit liner after cooling |
| 140 g | 1 | size 8 or 6 swivel for swivel leads; a metal pin for inline leads | Remove pin; fit liner after cooling |
From F43 to a finished lead
- Prepare a clean, completely dry mold, inserts and tools. Select the required cavity or variant.
- Fit the specified insert (size 8 or 6 swivel for swivel leads; a metal pin for inline leads) and check full closure and secure holding without force.
- Cast according to the instructions for the mold, metal and melting equipment. Keep plastic and rubber inserts out of molten metal.
- After the metal sets and handling is safe, remove the casting and pull out the pin. Let the lead cool fully before fitting the liner.
- Check the attachment or the smooth line passage, then test the complete rig.
- Weigh and inspect the first casting before continuing with a larger batch.
Nominal weight refers to one casting. The metal and finishing affect actual weight. Respect the load limits of the rod and complete rig; an inline hole alone does not guarantee free-running or safe lead-release behavior.
Casting safety
- Never pour molten metal into a damp mold. Inserts and tools must also be completely dry.
- Wear safety glasses and suitable protective gloves; work on a stable, heat-resistant surface with effective ventilation.
- Follow the mold, metal and melting-equipment instructions. A mold temperature limit is not a recommended pouring temperature.
- Do not eat, drink or smoke when working with lead. Keep casting equipment separate from kitchen utensils and wash your hands afterwards.
Frequently asked questions (FAQ)
How many leads does F43 cast?
Filling all cavities produces 3 leads at 100 / 120 / 140 g. You can also fill individual cavities.
Which insert should I use?
Use the specified size 8 or 6 swivel for swivel leads; a metal pin for inline leads. Dry-fit the part in its groove and verify complete closure before pouring.
What does this offer include?
The aluminum mold. Select the compatible attachment and finishing accessories separately, and check any supplied pins in the particular pack.
Will the profile always hold in a current?
No. Holding depends on weight, bottom slope and hardness, current and line pull. Try the actual rig in the intended conditions.
Does this mold guarantee safe lead release?
No. Release after line breakage depends on the complete rig, including clips, swivels, liners and stops. Test the combination you will actually use.
→ For all detailed technical information, see the product parameters below.
↓ Find related and similar products below to help complete your tackle.
Additional parameters
| Category: | Grippa Lead Molds |
|---|---|
| Weight: | 0.565 kg |
| Designation: | F43 |
| Material: | aluminum |
| Compatible PVC tube: | 3 mm |
| Number of castings: | 3 |
| Compatible swivel: | size 8 or 6 (larger) |
| Compatible coating: | rubber coating |
| Warranty: | 2 years |
| Casting Weight Range – All Molds: | Over 60 up to 120 g, Over 120 up to 200 g |
| Freshwater Casting Weight Range: | Over 60 to 100 g, Over 100 to 150 g |
| Cast Type: | Sinker |
| Freshwater Casting Type: | Grippa |
Product rating
Be the first who will post an article to this item!
Leave a rating
List of ratings
Discussion
Be the first who will post an article to this item!