F182 inline lead mold (130–150g)
Code: YM/0182Related products
Product detailed description
Your Mold F182 aluminum lead mold produces inline leads. It has 2 cavities for nominal weights of 130 / 150 g. Fill individual cavities as needed.
F182 combines two medium-heavy inline leads at 130 and 150 g. It follows the lighter F80 at 75, 90 and 110 g; F181 provides the next step at 165 and 185 g. All three use the tapered 3/5 mm insert system.
The shaped contact surface can help limit rolling and movement on the bottom. Actual holding depends on lead weight, bottom hardness and slope, current and line pull. Choose the weight for your fishing conditions and the load limits of the rod and complete rig; the profile alone does not guarantee holding or a casting distance.
Casting uses a tapered metal pin for the 3/5 mm profile. Remove it after the metal sets and fit a matching tapered rubber insert into the cool, finished lead. The 3/5 mm specification describes a taper, not any straight tube with a 3 or 5 mm diameter. A tapered pin and matching insert are listed among the related accessories; check the contents of the particular pack before starting. Finish the cleaned casting with a rubber lead coating according to the coating manufacturer’s instructions.
Cast-in attachment parts and finishing accessories are selected separately for the specific construction.
Weight and insert overview
| Nominal weight | Cavities | Insert for casting | Finishing |
|---|---|---|---|
| 130 g | 1 | tapered 3/5 mm metal pin | Remove pin; fit liner after cooling |
| 150 g | 1 | tapered 3/5 mm metal pin | Remove pin; fit liner after cooling |
From F182 to a finished lead
- Prepare a clean, completely dry mold, inserts and tools. Select the required cavity or variant.
- Fit the specified insert (tapered 3/5 mm metal pin) and check full closure and secure holding without force.
- Cast according to the instructions for the mold, metal and melting equipment. Keep plastic and rubber inserts out of molten metal.
- After the metal sets and handling is safe, remove the casting and pull out the pin. Let the lead cool fully before fitting the liner.
- Check the attachment or the smooth line passage, then test the complete rig.
- Weigh and inspect the first casting before continuing with a larger batch.
Nominal weight refers to one casting. The metal and finishing affect actual weight. Respect the load limits of the rod and complete rig; an inline hole alone does not guarantee free-running or safe lead-release behavior.
Casting safety
- Never pour molten metal into a damp mold. Inserts and tools must also be completely dry.
- Wear safety glasses and suitable protective gloves; work on a stable, heat-resistant surface with effective ventilation.
- Follow the mold, metal and melting-equipment instructions. A mold temperature limit is not a recommended pouring temperature.
- Do not eat, drink or smoke when working with lead. Keep casting equipment separate from kitchen utensils and wash your hands afterwards.
Frequently asked questions (FAQ)
How many leads does F182 cast?
Filling all cavities produces 2 leads at 130 / 150 g. You can also fill individual cavities.
Which insert should I use?
Use the specified tapered 3/5 mm metal pin. Dry-fit the part in its groove and verify complete closure before pouring.
What does this offer include?
The aluminum mold. Select the compatible attachment and finishing accessories separately, and check any supplied pins in the particular pack.
Will the profile always hold in a current?
No. Holding depends on weight, bottom slope and hardness, current and line pull. Try the actual rig in the intended conditions.
Does this mold guarantee safe lead release?
No. Release after line breakage depends on the complete rig, including clips, swivels, liners and stops. Test the combination you will actually use.
→ For all detailed technical information, see the product parameters below.
↓ Find related and similar products below to help complete your tackle.
Additional parameters
| Category: | Inline Fishing Lead Molds |
|---|---|
| Weight: | 0.5 kg |
| Designation: | F182 |
| Material: | aluminum |
| Compatible PVC tube: | 3 / 5 mm |
| Number of castings: | 2 |
| Compatible coating: | rubber coating |
| Warranty: | 2 years |
| Casting Weight Range – All Molds: | Over 120 up to 200 g |
| Freshwater Casting Weight Range: | Over 100 to 150 g |
| Cast Type: | Sinker |
| Freshwater Casting Type: | Grippa |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!