F121 looped torpedo lead mold (120–200 g) + 100 free loops
Code: YM/0121Related products
Product detailed description
The Your Mold F121 aluminum mold produces torpedo leads. Its 4 cavities cover nominal weights of 120 / 150 / 180 / 200 g. Use individual cavities as needed; the weights describe separate castings, not one combined lead.
F121 combines four heavier weights at 120, 150, 180 and 200 g with a size 1 loop attachment. F136 offers lighter intermediate choices at 100 and 140 g. Compare F122 if you need an inline passage at the same weights as F121.
A rounded or elongated body presents a different profile from a textured Grippa. Its actual flight and movement on the bottom depend on shape, weight, current and the complete rig. Choose the lead for the venue and tackle; the name alone does not guarantee casting distance, holding or a fixed fishing depth.
Fit the specified Your Mold size 1 loop in the relevant groove of the dry mold. The embedded section stays anchored in the lead and the exposed eye remains accessible for attaching the rig. Verify orientation and complete closure without force.
This offer includes 100 free universal SAF size 1 stainless steel loops (SAFNP-100, height 15 mm, wire 1.3 mm). These are different from the original Your Mold 7204 loops. Always check the selected loop in the mold before casting. No additional discounts or other benefits apply.
Weight and insert overview
| Nominal weight | Cavities | Insert during casting | Finishing |
|---|---|---|---|
| 120 g | 1 | Your Mold size 1 loop | Trim sprue; check attachment |
| 150 g | 1 | Your Mold size 1 loop | Trim sprue; check attachment |
| 180 g | 1 | Your Mold size 1 loop | Trim sprue; check attachment |
| 200 g | 1 | Your Mold size 1 loop | Trim sprue; check attachment |
From the F121 mold to a finished casting
- Prepare a clean, completely dry mold, inserts and tools. Select the required cavity.
- Fit the specified insert (Your Mold size 1 loop) and verify full closure and secure holding without force.
- Cast according to the mold, metal and melting-equipment instructions. Keep plastic parts out of molten metal.
- After the metal has set and handling is safe, remove the casting and check the attachment.
- Trim the sprue and check all edges and functional passages before assembly.
- Weigh the first casting and test the complete rig before continuing with a larger batch.
The nominal weight refers to one casting. Metal composition and finishing affect the actual weight. Respect the load limits of the rod and tackle. A passage or cast-in swivel alone does not guarantee free-running behavior or safe release after line breakage. Finish the cleaned casting with a rubber lead coating according to the coating manufacturer’s instructions.
Casting safety
- Never pour molten metal into a damp mold. Inserts and tools must also be completely dry.
- Wear safety glasses and suitable protective gloves. Use a stable, heat-resistant work area with effective ventilation.
- Follow the instructions for the mold, metal and melting equipment. The mold temperature limit is not a recommended pouring temperature.
- Do not eat, drink or smoke when working with lead. Keep casting equipment separate from kitchen utensils and wash your hands afterwards.
Frequently asked questions (FAQ)
Which weights does F121 cast?
4 separate cavities at 120 / 150 / 180 / 200 g. You can fill individual cavities without using the others.
What insert does the mold require?
Your Mold size 1 loop. Dry-fit it before pouring and check that the mold closes fully.
What is included?
The aluminum mold and 100 free universal SAF size 1 stainless steel loops. Original Your Mold loops, swivels and finishing parts are separate products.
Can I use any swivel or loop of a similar size?
No. Size labels alone do not establish matching wire diameter, eye dimensions or seating. Check the actual part in the mold.
When should I choose another mold?
F121 combines four heavier weights at 120, 150, 180 and 200 g with a size 1 loop attachment. F136 offers lighter intermediate choices at 100 and 140 g. Compare F122 if you need an inline passage at the same weights as F121.
→ For all detailed technical information, see the product parameters below.
↓ Find related and similar products below to help complete your tackle.
Additional parameters
| Category: | Olive & Torpedo Lead Molds |
|---|---|
| Warranty: | 2 years |
| Designation: | F121 |
| Material: | aluminum |
| Number of castings: | 4 |
| Compatible loop: | #1 |
| Compatible coating: | rubber coating |
| Warranty: | 2 years |
| Casting Weight Range – All Molds: | Over 60 up to 120 g, Over 120 up to 200 g |
| Freshwater Casting Weight Range: | Over 100 to 150 g, Over 150 to 200 g |
| Cast Type: | Sinker |
| Freshwater Casting Type: | Torpedo |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!