WFT TUFF STUFF Fluorocarbon 1.20 mm, 50 m
Code: 1D-C 325-120Related products
Product detailed description
A large baitfish and the heaviest halibut setup call for a different trace from an ordinary cod-teaser rig. WFT TUFF STUFF 1.20 mm is the heaviest diameter class in this selection, chosen for dedicated natural-bait fishing for large ling and halibut. It also works as a short separate section ahead of a large halibut jig, where substantial construction and clear handling take priority.
Pure fluorocarbon distinguishes TUFF STUFF from copolymer monofilaments and materials with only a fluorocarbon coating. It is denser than water and sinks; the leader alone does not determine fishing depth, which also depends on the lure, lead, current and main line. Its optical properties can help make the terminal section less conspicuous, but do not guarantee invisibility. Fluorocarbon is not guaranteed bite-proof either. Inspect the actual condition of the whole section after contact with teeth or sharp bottom features.
SAF recommendation: large ling, halibut and natural-bait systems. Use 1.20 mm for the heaviest traces carrying whole fish or fillets and for short leaders, around a metre long, ahead of large halibut jigs. Build the terminal connections with crimps. We do not describe this stiff diameter as an ordinary tied cod trace, and do not base the recommended construction on conventional knotted ends.
Choosing a neighbouring diameter. 1.00 mm offers a smaller cross-section for heavy natural-bait traces and large jigs. Do not make the decision from fish weight alone: thicker material also changes stiffness, connection size and lure movement. Test the complete arrangement in the water again after changing diameter.
First establish the hook position in the natural bait and choose the swivel, attachment and any boom to suit the complete setup. The load-bearing section should run clearly without kinks or sharp rubbing against component edges. With a short leader ahead of a large jig, check that the loop moves freely and does not interfere with the head during use. Around a metre is an example layout rather than a fixed length requirement. Adjust it so you can inspect and handle the trace sensibly beside the boat.
At 1.20 mm we recommend crimping both terminal loops. Choose a sleeve specified for the actual material diameter and the required double-line passage. Apply the compression with suitable crimping pliers according to the sleeve manufacturer’s instructions; avoid crushing the ends into a sharp bend in the line. Size the loop to suit the eye and its movement. Check every finished trace under load using suitable handles and inspect the sleeve exits. Cut off and remake any damaged or slipping connection.
Select components to suit the finished trace design. A swivel helps limit transmitted rotation, a snap allows changes and the hook must fit the bait correctly. When comparing related products, consider eye size, length and handling as well as a figure in kilograms. With crimps, distinguish the sleeve’s internal dimensions from the manufacturer’s recommended line diameter.
Inspection and maintenance are part of every trip. After bottom contact or playing a fish, examine the unloaded leader for roughness, grooves or a permanent kink. Cut away damaged material rather than relying on the original rating of new line. Rinse the sea rig in fresh water, check the metal components and allow them to dry. Store line away from sunlight, heat and sharp edges.
The table compares TUFF STUFF diameters on 50 m spools. It gives verified linear breaking-strain figures from the WFT catalogue, not guaranteed knot strength or a permitted fish weight. The SAF figure for 0.80 mm differs from the catalogue, so it is not repeated here as verified data. This product is marked in bold; on a narrower screen the table scrolls horizontally.
| Diameter | Declared breaking strain | Length | Variant |
|---|---|---|---|
| 0.50 mm | 14 kg | 50 m | |
| 0.60 mm | 16.5 kg | 50 m | |
| 0.70 mm | 20 kg | 50 m | |
| 0.80 mm | Check package | 50 m | |
| 1.00 mm | 39 kg | 50 m | |
| 1.20 mm | 50 kg | 50 m | This product |
Frequently asked questions (FAQ)
Does 1.20 mm belong in an ordinary cod-teaser rig?
No. We choose this class for the heaviest traces targeting large ling and halibut, mainly with natural-bait systems or as a short leader ahead of a large halibut jig.
Should I tie knots in 1.20 mm?
For the use recommended here, build crimped terminal loops. We do not treat stiff 1.20 mm material as an ordinary knotting line; the sleeve, tool and finished-connection check must suit this heavy class.
Is TUFF STUFF fluorocarbon or coated monofilament?
The manufacturer describes it as leader material made from pure fluorocarbon. Do not confuse it with copolymer or material that only has a fluorocarbon surface coating.
Does the table give the strength of the finished trace?
No. It is the manufacturer’s linear figure for the material. Knots, crimps, wear and other components change the strength of the finished setup; the rating is not a maximum fish-weight figure.
Is it invisible underwater and resistant to biting through?
Neither is guaranteed. Its optical properties can help with a less conspicuous presentation, but the environment affects visibility. Inspect the leader after contact with teeth or sharp bottom features and replace damaged sections.
How many traces can I make from 50 m?
That depends on the length of each trace, the material used for its ends and the waste from replacing damaged sections. Measure the whole trace including loops and connections first; its straight section alone does not determine the total consumption.
→ See the Additional parameters section for technical details.
↓ Find related and similar products below the description.
Additional parameters
| Category: | Fluorocarbon Fishing Lines – Saltwater & Freshwater |
|---|---|
| Line diameter: | 1.2 mm |
| Metres: | 50 m |
| Strength: | 50.0 kg |
| Warranty: | 2 years |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
