F69 inline lead mold (70–100g)

Product detailed description

Your Mold F69 lead mold produces inline leads with a through passage in a hexagonal pear profile. The 4 cavities have nominal casting weights of 70 / 80 / 90 / 100 g. You can use the required cavity without filling all the others. This lets you make a supply matched to your tackle and the fishing location.

Four cavities cover medium weights of hexagonal inline leads. F69 follows the lighter F30; F95 extends the load to 100–130 g. Choose according to the fishing location and the way your complete inline rig works.

Flat sides can reduce rolling compared with a smooth rounded lead. Actual holding depends on the slope and hardness of the bottom, current and line tension. Use the lightest load that gives the required control and keep within the casting limits of your rod and complete tackle. A mold shape alone does not guarantee a casting distance or a fixed fishing depth.

Fit the included 4 metal guide pins, Ø 3.2 mm, before casting. They form the through passages and are withdrawn after the metal solidifies; they are not part of the finished fishing rig. Once the casting is cool and deburred, fit a separately sold 3 mm PVC tube in Dark brown or Dark green. Check the tube ends and free line movement in the assembled rig. Do not pour molten metal around a PVC tube. Finish the cleaned casting with a rubber lead coating according to the coating manufacturer’s instructions.

Weight and insert overview

Nominal grammes refer to one casting, not the total output of the mold. Actual weight varies with the metal and finishing. A through hole alone does not guarantee a free-running or drop-off rig. Check the tube or passage, swivel, stops and hooklink together. Coating and other finishing accessories are sold separately.

Frequently asked questions (FAQ)

How many leads does one mold produce?

4 leads if all cavities are filled, with nominal weights of 70 / 80 / 90 / 100 g. You may cast individual cavities.

Which insert is required?

Use the specified removable 3.2 mm guide pin. Remove the metal guide pin after casting.

What is supplied?

The aluminum mold and 4 removable metal guide pins, Ø 3.2 mm. Other accessories are sold separately.

When should I choose a different mold?

Compare F30 and F95 for another load range, body shape or attachment. Check each mold’s own insert requirements.

→ For all detailed technical information, see the Parameters section below.

↓ Below the product description you will also find related and similar products to help you choose and build a complete setup.