Lead Coating Powder Your Mold Metallic (80g)
Code: YM/1001-80Related products
Product detailed description
Your Mold effect paint is a finishing material for lead castings, including fishing weights, jig heads and pilkers. It is applied after casting and deburring; the coating is not an insert fitted in a mold cavity. Match the process to the finished metal part and protect its functional openings.
Select the required variant and 80 g pack size. Available finishes include Amber Metallic 1001, Terra Rough 1007, Pinie Rough 1003, Lava Rot 996, Silver Metallic 997 and Golden Antik 995. Rough variants have a textured effect; the entire range should not be treated as one smooth metallic finish.
Coating procedure
- Clean, degrease and thoroughly dry the casting. Remove burrs, oxidation and release-agent residues.
- Loosen the powder before use. When using a fluid bed, adjust the air to a gentle, even movement rather than blowing powder out of the cup.
- Preheat the casting evenly. The existing practical guide uses approximately 180 °C before application; adapt the heat-up time to its size.
- Briefly dip the heated casting into the powder or apply it with a suitable sieve. Remove immediately and tap off excess to keep the layer even.
- Reheat to flow out the layer; the practical guide for this range describes approximately 200–220 °C for this step. Set final baking time and temperature from the selected coating’s instructions; do not treat a brief reheat as a universal curing schedule.
- Allow to cool naturally, then check the coating, attachment eyes and line passage.
The amount of powder used depends on surface area, shape and layer thickness. A heavier lead does not by itself determine a fixed coating consumption. Make one test piece before coating a batch and check the finish after complete cooling.
For small castings and fine powders, Amigo is a practical fluid bed; Medium and XL offer more working space. Air requirements depend on powder type and fill level. Rubber coating powders need more airflow; Hailea ACO-208 provides reserve for this work. Remove plastic inserts and glued-on eyes before heating and fit them after cooling.
Safe coating practice
- Work with ventilation and avoid breathing powder dust. Follow the coating label and safety instructions; use suitable eye, hand and respiratory protection.
- Handle hot castings with suitable tools on a heat-resistant surface. Keep workshop heating equipment separate from food preparation.
- Remove heat-sensitive PVC tubes, plastic parts and glued-on eyes before heating. Keep line passages, attachment eyes and moving joints clear.
- Do not eat, drink or smoke while handling lead. Clean the work area and wash your hands after use.
Frequently asked questions (FAQ)
What is included?
The selected 80 g colour variant. Casting molds, white base, clear topcoat and coating equipment are sold separately.
Can I coat castings from different molds?
Yes, when the coating and heating process are suitable for the finished lead casting. The mold model alone does not determine coating compatibility.
Is one baking time suitable for every variant?
Follow the selected coating’s label and technical instructions. Pack size and a similar colour do not establish an identical baking schedule.
How do I avoid a thick or uneven finish?
Use a clean surface, even preheating, loosened powder and a brief dip. Tap off excess and test one casting before a series.
→ Compare more shades and pack sizes in lead coating powders.
↓ Related and similar products below help you choose coating equipment and alternative finishes.
Additional parameters
| Category: | Powder coating for lead weights |
|---|---|
| Weight: | 80 g |
| Colour: | according to variant |
| Warranty: | 2 years |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!