Shipping across the EU and to Norway | Secure online payment | 5% off for registered customers

Lead Casting Mold F211 – Round Jig Heads 6-16g

Code: YM/0211
Not rated Rating details
22,11 € Measure price:
In stock (1 pcs)

Your Mold F211 aluminum mold for six round jig heads weighing 6, 8, 10, 12, 14 and 16 g. Designed for VMC 7161 hooks in sizes 1/0, 2/0 and 3/0 for freshwater soft plastic fishing.

Detailed information

Product detailed description

The Your Mold F211 lead casting mold produces round jig heads weighing 6, 8, 10, 12, 14 and 16 g. Six cavities in 2 g steps let you prepare the same basic rig in several weights and adapt it to the water. It is particularly useful for freshwater perch and zander fishing with soft plastics, and for pike when the rest of the tackle is appropriate.

The lighter 6 and 8 g options suit situations where you can work the lure more slowly and a longer fall does not mean losing control. With 10 and 12 g, you can increase the weight gradually; 14 and 16 g give you scope to respond to a deeper spot, current or greater lure resistance. The whole setup affects the weight you need, including the line and lure size. In the water column, focus on the target depth; when jigging near the bottom, maintain clear contact.

The listed hooks are VMC 7161 in sizes 1/0, 2/0 and 3/0. A forged high-carbon steel construction, Needle Sharp point and 60° bend towards the eye form the basis of this series. The pronounced bend provides room for the lure body, but the largest hook may not suit a small or very slim soft plastic. Hold the hook alongside the body to check where the point will emerge and whether the tail can move freely.

A round head suits several presentations: short lifts, pauses on the fall and steady retrieves. A paddle-tail adds its own movement, while a soft jerkbait responds more to rod-tip action and speed changes. Choose from the lure range according to the selected hook, rather than soft plastic length alone. Straight rigging is important for the intended swimming action.

If 16 g is no longer enough, F212 extends the range to 18–30 g and uses VMC 7161 hooks in sizes 1/0 to 4/0. For finer presentations, compare other jig head molds and their specified hook series. You can finish the castings with powder paint for lead; neither the paint nor an excessively thick coating should block the eye or interfere with straight rigging.

Casting weights and hook compatibility

Casting weightHook seriesHook sizes
6, 8, 10, 12, 14 and 16 gVMC 71611/0, 2/0, 3/0

This overview lists hook options for the mold as a whole. It does not automatically assign every hook size to every cavity. Before casting, check the hook position in your selected cavity and make sure the mold closes fully.

From the F211 mold to a finished jig head

  1. Prepare a clean, completely dry mold, a compatible hook and the required equipment. Choose the cavity for your desired weight.
  2. Seat the hook in its groove, including the eye. If inserting a keeper, check its position as well; the mold must close fully without force.
  3. Secure the mold and cast according to the instructions for the mold, casting metal and melting equipment.
  4. Once the casting has fully solidified and cooled safely, remove it, trim the sprue and check that the hook is straight and firmly anchored.
  5. Weigh the first head, finish its surface according to the coating instructions, and test straight rigging and lure action. Then continue with further castings.

Equipment and methods for casting your own lead tackle

Select hooks, paints and other accessories separately; they are not automatically included with the mold. A first test casting helps you check cavity fill and actual weight. Changing the metal changes the casting weight, so do not apply the stated lead weights to a different alloy.

Safe lead casting

  • Never pour molten metal into a damp mold. Inserted components and tools must also be completely dry.
  • Wear safety glasses and suitable gloves, and work on a stable, heat-resistant surface.
  • Provide effective ventilation and follow the instructions for the metal and melting equipment.
  • Keep food, drink and smoking away from the work area. Keep lead-working equipment separate from household utensils and wash your hands afterwards.

Frequently asked questions (FAQ)

Who is F211 best suited to?

Anglers using soft plastics on 1/0 to 3/0 hooks who want to change the weight between 6 and 16 g while keeping the same basic head shape.

How can I use the 2 g weight steps?

Start with a weight that lets you control the lure. Add one step if contact becomes poor; reduce it for a longer fall if you can still maintain control.

Should I always choose the largest 3/0 hook?

No. The lure body and the position of its moving section determine the choice. An overly long shank can restrict action, while too small a bend leaves insufficient clearance for a hookset.

Do I need to fill all six cavities?

No. You can cast only the weights you need. Before using each cavity, check that the hook seats correctly and the mold closes fully.

When should I choose F212 instead of F211?

When you need more than 16 g. F212 starts at 18 g and goes up to 30 g; also check that its hook options suit your lure.


→ See the Additional parameters section for technical details.

↓ Find related and similar products below the description.

Additional parameters

Category: Jig Head Molds
Designation: F211
Material: aluminum
Number of castings: 6
Compatible coating: powder paint, rubber coating
Warranty: 2 years
Casting Weight Range: Up to 10 g, Over 10 to 30 g
Casting Weight Range – All Molds: Up to 10 g, Over 10 up to 30 g
Jig Head Shape: Round
Cast Type: Jig Head

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Security check

Discussion

Be the first who will post an article to this item!

Do not fill out this field

Security check