Lead Casting Mold F212 – Round Jig Heads 18-30g
Code: YM/0212Related products
Product detailed description
The Your Mold F212 lead casting mold produces five round jig heads weighing 18, 20, 22, 25 and 30 g. It suits situations where a lighter head no longer gives enough control or fails to reach the required depth, while you still want a small to medium-sized hook. Use it for zander, pike and larger perch, or lighter saltwater lure fishing where local conditions allow.
The smaller steps between 18, 20 and 22 g help you adjust the fall without a large change in presentation. Move to 25 or 30 g when current or drift has a stronger effect on the rig. Choose the lowest weight that still lets you control the lure reliably. An excessively heavy head shortens the fall and may lodge in obstacles more often when worked along the bottom; too little weight reduces control. Depth alone is not enough to make the choice.
The mold is designed for VMC 7161 hooks in sizes 1/0, 2/0, 3/0 and 4/0. The Round Jig 60° series features a forged high-carbon steel body, a Needle Sharp point and a 60° bend towards the eye. The open bend is useful with deeper soft plastic bodies, but the point and enough clearance for a hookset must remain above the lure. Choose the hook according to body thickness and length, rather than head weight.
A round head works for short hops off the bottom and steady retrieves. With a paddle-tail, leave the section ahead of the paddle free to move; with a soft jerkbait, allow its rear section to work. When choosing from the lure range, match the body to the reach of the selected hook. Rig the soft plastic straight: a bent body may spin during the retrieve and change its intended action.
F212 follows the lighter F211, covering 6–16 g. For a larger soft plastic on a 7/0 or 8/0 hook, consider F221 with its 20–40 g range. The weights overlap in part, but the hook options differ. Finish your cast heads with powder paints and compare other shapes in the jig head mold category.
Casting weights and hook compatibility
| Casting weight | Hook series | Hook sizes |
|---|---|---|
| 18, 20, 22, 25 and 30 g | VMC 7161 | 1/0, 2/0, 3/0, 4/0 |
This overview lists hook options for the mold as a whole. It does not automatically assign every hook size to every cavity. Before casting, check the hook position in your selected cavity and make sure the mold closes fully.
From the F212 mold to a finished jig head
- Prepare a clean, completely dry mold, a compatible hook and the required equipment. Choose the cavity for your desired weight.
- Seat the hook in its groove, including the eye. If inserting a keeper, check its position as well; the mold must close fully without force.
- Secure the mold and cast according to the instructions for the mold, casting metal and melting equipment.
- Once the casting has fully solidified and cooled safely, remove it, trim the sprue and check that the hook is straight and firmly anchored.
- Weigh the first head, finish its surface according to the coating instructions, and test straight rigging and lure action. Then continue with further castings.
Select hooks, paints and other accessories separately; they are not automatically included with the mold. A first test casting helps you check cavity fill and actual weight. Changing the metal changes the casting weight, so do not apply the stated lead weights to a different alloy.
Safe lead casting
- Never pour molten metal into a damp mold. Inserted components and tools must also be completely dry.
- Wear safety glasses and suitable gloves, and work on a stable, heat-resistant surface.
- Provide effective ventilation and follow the instructions for the metal and melting equipment.
- Keep food, drink and smoking away from the work area. Keep lead-working equipment separate from household utensils and wash your hands afterwards.
→ You will find all detailed technical information in the Product parameters table.
↓ Related and similar products below the description help you choose suitable items and put together a complete setup.
Frequently asked questions (FAQ)
When should I move from F211 to F212?
When 6–16 g no longer provides enough control and you need 18–30 g. Judge the change by current, drift and lure resistance, not depth alone.
Does a heavier head mean a larger hook?
No. Head weight and hook size serve different purposes. With F212, choose from the listed 1/0 to 4/0 hook sizes to suit the soft plastic, and check the selected cavity before casting.
Are round heads only for fishing near the bottom?
No. You can also use a steady retrieve or fish through the water column. Adjust running depth through head weight, retrieve speed and the length of pauses.
Can I use a different hook series?
An identical size number does not guarantee an identical shape. Use VMC 7161 as the specified series for F212; another series cannot be confirmed without checking its fit.
Are hooks and keepers included with the mold?
They are not automatically included. Select hooks separately; compatibility of the preformed BH19 keeper with F212 has not been confirmed here.
Additional parameters
| Category: | Jig Head Molds |
|---|---|
| Designation: | F212 |
| Material: | aluminum |
| Number of castings: | 5 |
| Compatible coating: | powder paint, rubber coating |
| Warranty: | 2 years |
| Casting Weight Range: | Over 10 to 30 g |
| Casting Weight Range – All Molds: | Over 10 up to 30 g |
| Jig Head Shape: | Round |
| Cast Type: | Jig Head |
Product rating
Be the first who will post an article to this item!
Leave a rating
List of ratings
Discussion
Be the first who will post an article to this item!
