Platil Marine 0.90 mm / 55 kg, 100 m

Product detailed description

Platil Marine 0.90 mm moves towards heavy natural-bait traces and substantial terminal sections ahead of larger sea lures. For ling, hake or halibut on fish bait, the emphasis is on a firm body rather than a delicate lure leader. Because of the range’s stiffness, we do not automatically assign it to the same tied rigs as a softer 0.90 mm line from another brand.

Firmer, stiffer rig monofilament needs to be chosen around the way the trace is built. In SAF practice, Platil handles differently from soft Regenerator, becoming almost wire-like in the heavier versions. Stiffness can help a body retain its shape while increasing the demands on eye size and connections. The 100 m pack supplies spare rigs and replacement sections for later trips.

Neighbouring diameters and rig choice. Compared with 0.80 mm, this is a more targeted heavy natural-bait option. Platil 1.00 mm moves into the heaviest class. For a conventional, manageable tied cod rig, compare finer Platil rather than adding stiffness without a purpose.

On a natural-bait trace, the fish bait should move without repeatedly twisting the body. Plan hook position, trace length and sinker placement together. With bulky bait, check its behaviour as the boat moves too. When used ahead of a jig, treat the lure’s hook arrangement as a separate design: a terminal leader between braid and jig is not automatically the stinger running along the soft body.

For this heavy-duty class we recommend crimped end connections. The sleeve bore must suit the actual diameter and material path through the loop; use the appropriate tool and procedure for that sleeve. An excessive crimp may damage the line, while an insufficient one may fail to hold it. Follow the component manufacturer’s guidance and test each new connection before fishing. A bulky conventional knot forced into a small eye is not the recommended solution here.

Do not convert the 55 kg label figure into a fish weight you can lift by the trace. Connections, hardware and wear affect the completed rig. Inspect the terminal section and areas beside eyes after bottom or fish contact. Cut away damaged line, rinse used sea rigs in fresh water and let them dry. Keep spare material away from heat and direct sunlight. Abrasion resistance is not guaranteed bite protection; choose an appropriate terminal material when sharp teeth require it.

Frequently asked questions (FAQ)

When should I choose Platil Marine 0.90 mm?

Heavy traces for ling, hake and halibut.

Can it be the body of a cod tube-eel rig?

Its main emphasis is a substantial natural-bait trace or terminal leader. For a conventional tied tube-eel system, also compare more appropriate finer versions in the range.

Should I tie or crimp this diameter?

For the heavy-duty use described here, we recommend crimped end connections with a suitable sleeve and tool. Bulky conventional knots forced into small eyes are not recommended.

Why not choose Platil solely by another brand’s diameter?

In SAF practice Platil has a firmer construction and its heavier diameters serve distinctly heavy-duty roles. Equal diameter does not mean equal suppleness, eye size or end connection.

Does 55 kg describe the strength of the complete rig?

No. It is a declared material figure; connections, components and wear affect the finished rig. It is not a fish weight that can be lifted by the line.

When should I rebuild the trace?

After cuts, rough spots, flattening or damage beside an eye or connection. Remove the damaged section and test the replacement end fitting.

→ All detailed technical information is available below in the Product parameters table.

↓ Below the product description, you will also find related and similar products to help you choose and put together a complete setup.