Savage Gear Regenerator Mono 0.70 mm / 26 kg, 30 m

Product detailed description

Regenerator 0.70 mm bridges a lure leader and material for homemade sea rigs. Choose it where a larger soft bait or metal lure calls for a more substantial but still soft terminal section. Its suppleness matters when comparing it with a stiff rig-body monofilament of the same nominal diameter; millimetres alone do not describe the difference.

Soft copolymer monofilament is Regenerator’s defining character. A supple leader gives the bait room to move, with stretch helping cushion sudden terminal loads. It is not fluorocarbon, and another leader material’s behaviour cannot be transferred on diameter alone. The 30 m pack supplies individual leaders; it is not intended as a complete deep-sea reel main line.

Neighbouring diameters and rig choice. Compared with 0.60 mm, this offers a more substantial end section for larger lures. Consider the thicker versions when a stronger-built leader is needed, and reassess lure movement and connections along with diameter.

Distinguish a terminal leader for a single lure from the body of a multi-hook system. The first allows lure movement; the second carries several branches and keeps baits sensibly separated. They are different jobs, and one diameter need not be ideal for both. Test a homemade rig with the actual hooks, baits and lower sinker rather than judging a bare piece of line on the workbench.

For a tied connection, choose a knot suited to the actual monofilament and eye. Moisten it, align the turns and tighten steadily. If the line whitens, turns cross or the knot bears against a sharp edge, cut it off and retie. A crimped loop is an additional option only with a suitable sleeve and tool; their size cannot be copied from another diameter on similar breaking strain alone. Test each new connection under controlled tension.

Do not convert the 26 kg label figure into a fish weight you can lift by the trace. Connections, hardware and wear affect the completed rig. Inspect the terminal section and areas beside eyes after bottom or fish contact. Cut away damaged line, rinse used sea rigs in fresh water and let them dry. Keep spare material away from heat and direct sunlight. Abrasion resistance is not guaranteed bite protection; choose an appropriate terminal material when sharp teeth require it.

Frequently asked questions (FAQ)

When should I choose Savage Gear Regenerator Mono 0.70 mm?

Heavier sea lure fishing with a manageable leader.

Can it be the body of a cod tube-eel rig?

It can form part of a suitably designed homemade rig. Assess body and branches separately, and check hook reach with the actual baits fitted.

Should I tie or crimp this diameter?

A tied connection is a practical option when the selected knot seats neatly in the actual eye. Moisten, align and test it. Crimping requires its own matched sleeve and procedure.

What should I check at the lure before fishing?

Check lure movement in the water, snap size, eye smoothness and the leader beside the lower connection. On a rig, also check branch length and spacing.

Does 26 kg describe the strength of the complete rig?

No. It is a declared material figure; connections, components and wear affect the finished rig. It is not a fish weight that can be lifted by the line.

When should I rebuild the trace?

After cuts, rough spots, flattening or damage beside an eye or connection. Remove the damaged section and test the replacement end fitting.

→ All detailed technical information is available below in the Product parameters table.

↓ Below the product description, you will also find related and similar products to help you choose and put together a complete setup.