Shipping across the EU and to Norway | Secure online payment | 5% off for registered customers

Lead Casting Mold F188 – Round Screw-In Heads 15-35g

Code: YM/0188
Not rated Rating details
22,07 € Measure price:
Within 10 days

Your Mold F188 aluminium mold for five round screw-in heads weighing 15, 20, 25, 30 and 35 g. For soft baits held by a screw-in spring with separate hook rigging. The SAF-listed combination uses size 05 loops and an S1 spring, cast into the head.

Detailed information

Product detailed description

The Your Mold F188 lead casting mold offers five round screw-in heads from 15 to 35 g in 5 g steps. Cast 15, 20, 25, 30 and 35 g to compare loads while retaining the same lure attachment system. It suits lure fishing and boat presentations where you want a spring to hold the soft bait and the freedom to select hook-rig length and placement separately.

The 5 g steps help adjust fall and contact. With the same soft bait, compare 20 and 25 g without the weight change also imposing a different cast-in hook. Lure bulk, depth, current, line and presentation angle all affect the choice. Use 15–20 g where you still control the rig, with 25–35 g providing more load when required. No individual weight can be assigned a universal fishing depth.

For this listed version, SAF specifies Your Mold size 05 loops and an S1 spring. The loops form attachment points in the finished head, while the spring holds the front of the soft bait. These components are inserted before pouring and remain in the metal. If considering different parts, check their exact shape against the particular mold recesses; another loop is not a substitute simply because it uses similar wire.

Screw the lure on in line with the head. The spring needs to engage a suitable part of the lure body without splitting or distorting it. Check the straight transition and test the action in water. Attach the hook rig to the intended loop rather than the working coils of the spring. Match rig length, hook size and any stinger release to the actual lure. Make sure neither the hook nor leader restricts the paddle or twister tail.

F189 extends lower to 8–18 g, while F187 continues at 40–60 g. At the shared 15 g weight, consider the other weights you need and the different fittings: F189 uses size 01 loops and S2. For a fish-head profile, compare the lighter F194 at 10–20 g or F195 at 30–50 g. The F173 Cheburashka range offers 14–30 g with a removable clip and an articulated hook, a different way of assembling the lure.

Before a production run, cast and finish one head of the required weight. Check the surface, loop anchoring and spring position before rigging the soft bait. Changing weight will not necessarily correct crooked rigging. If the lure turns or its active tail does not work, check alignment and the hook arrangement before adding unnecessary load. Assess the strength of each connecting part against the complete fishing setup.

F188 weights and cast-in components

Nominal lead head weightCast-in loopCast-in spring
15 gYour Mold size 05Your Mold S1
20 gYour Mold size 05Your Mold S1
25 gYour Mold size 05Your Mold S1
30 gYour Mold size 05Your Mold S1
35 gYour Mold size 05Your Mold S1

The table separates the loop’s attachment role from the spring’s bait-holding role. The same SAF-listed combination is specified for all five weights. This is not a Cheburashka clip system: no BL1/BL2 strip is inserted and removed to create an articulated clip passage in this procedure.

From F188 mold to a screw-in head

  1. Prepare a clean, completely dry F188 mold, size 05 loops and an S1 spring. Choose the cavity and inspect every component.
  2. Seat the loops and spring accurately in the mold recesses. Both halves must close fully without force. Follow the instructions when sealing unused openings with suitable material and secure the mold.
  3. Cast according to the mold, metal and melting equipment instructions. Use the working temperature and filling method specified for your process, keeping the components correctly seated.
  4. After solidification and safe cooling, remove the head and trim the sprue. The loops and spring remain in the casting; check their anchoring, alignment and clear loop openings.
  5. Weigh the first head, apply any surface finish and let it cool. Screw the soft bait straight onto the spring, attach the hook rig to the intended loop and check the complete assembly before making a larger batch.

Lead casting equipment and practical guidance

The stated weights are nominal lead casting weights. Metal composition, cavity filling and sprue trimming affect the result, so weigh the first pieces. Other low-melting metals may produce a different weight. Follow the coating instructions and keep loop openings and the spring’s working section clear. Prepare the correct loops, springs, suitable hooks and melting equipment for production. The table identifies the required components; wire diameter alone does not replace the shape of the specified part.

Casting safety

  • Never pour molten metal into a damp mold; the loops, springs and tools must also be completely dry.
  • Wear safety glasses and suitable gloves and use a stable, heat-resistant work area.
  • Provide effective ventilation and follow the instructions for the metal, auxiliary products and melting equipment you use.
  • Keep food, drinks and smoking away from the work area; keep lead-working equipment separate from household utensils and wash your hands afterwards.

Frequently asked questions (FAQ)

Does F188 include a 15 g head?

Yes. The five cavities in the listed mold are 15, 20, 25, 30 and 35 g, in 5 g steps.

When should I choose F188 over lighter F189?

When you mainly need 20–35 g or want this continuous range in one mold. F189 covers 8–18 g and uses different components: size 01 loops and S2.

Can I prepare the same loops for all cavities?

The SAF-listed version specifies size 05 for all five weights, with S1 springs. Check each assembly in its mold recesses before pouring.

Do I need a fixed jig hook cast into the head?

This system uses cast-in loops and a spring to hold the lure. The hook rig is prepared separately for the particular soft bait and connected to the intended loop.

Why does the lure turn after rigging?

It may be screwed on off-centre, or the hook rig may restrict movement. Check straight alignment and the lure’s action in water before adjusting weight.


→ See the Additional parameters section for technical details.

↓ Find related and similar products below the description.

Additional parameters

Category: Cheburashka & Screw-In Jig Head Molds
Weight: 0.4 kg
Designation: F188
Material: aluminum
Weight of castings: 15 / 20 / 25 / 30 / 35 g
Number of castings: 5
Compatible loop: size 05
Compatible screw-in spring: size S1
Warranty: 2 years
Casting Weight Range – All Molds: Over 10 up to 30 g, Over 30 up to 60 g
Cast Type: Screw-in Head

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Security check

Discussion

Be the first who will post an article to this item!

Do not fill out this field

Security check